User manual SHARP XG-C40XE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP XG-C40XE. We hope that this SHARP XG-C40XE user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP XG-C40XE (8464 ko)
SHARP XG-C40XE (3197 ko)
SHARP XG-C40XE (8271 ko)
SHARP XG-C40XE (8265 ko)
SHARP XG-C40XE (8432 ko)
SHARP XG-C40XE (8265 ko)
SHARP XG-C40XE (8208 ko)
SHARP XG-C40XE (8572 ko)
SHARP XG-C40XE (8271 ko)
SHARP XG-C40XE (8572 ko)
SHARP XG-C40XE (3197 ko)
SHARP XG-C40XE OPERATION MANUAL (8265 ko)
Manual abstract: user guide SHARP XG-C40XE
Detailed instructions for use are in the User's Guide.
[. . . ] Important Information Setup & Connections Operation Useful Features
Maintenance & Troubleshooting
Appendix
OPERATION MANUAL
XG-C40XE
MODEL
LCD PROJECTOR
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/ 336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/ 23/EEG, gewijzigd door 93/68/EEG. [. . . ] 4 To exit from the GUI, press MENU.
Projector
Remote control
Selecting the Signal Type
This function allows you to select the input signal type (COMPUTER/RGB or COMPONENT) for INPUT 1 or 2 port.
1, 6 2, 3, 4 5
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. 2 Press ß/© to select "Picture".
MOUSE
ADJ.
3 Press / to select "Signal Type", and then press ©. (GUI) On-screen Display 4 Press / to select "Computer/RGB" or "Component". 6 To exit from the GUI, press MENU.
29
Picture Adjustments
Projector Remote control
I/P Conversion
This function allows you to select either an interlaced display or a progressive display of a video signal. The progressive display projects a smoother video image.
1, 6 2, 3, 4 5
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position. )
MOUSE
ADJ.
(GUI) On-screen Display
1 Press MENU. 3 Press / to select "I/P Conversion", and then press ©. 4 Press / to select "Interlaced" or "Progressive". 6 To exit from the GUI, press MENU.
Interlaced mode
Interlaced mode creates a single image through the activation of scanning lines in two fields. Use this mode when projecting moving images.
Progressive mode
Progressive mode creates a single image using all available scanning lines. Use this mode when projecting still images to avoid flicker and stripes that result from interlaced source still images.
Operation
Audio Adjustments
Projector Remote control This projector's audio is factory preset to standard settings. However, you can adjust it to suit your own preferences by adjusting the following audio settings.
Description of Adjustment Items
1, 5 2, 3, 4
Selected item Treble Bass Reset ß button © button For weaker treble For stronger treble For weaker bass For stronger bass All audio adjustment items are returned to the factory preset settings.
(GUI) On-screen Display 2
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. 4 Press ß/© to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU.
· To reset all adjustment items, select "Reset" on the "Audio" menu screen and press ENTER.
30
Computer Image Adjustments (INPUT 1 or 2 mode Only)
Projector Remote control
Adjusting the Computer Image
When displaying computer patterns which are very detailed (tiling, vertical stripes, etc. ), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for the optimum computer image.
1, 5 2, 3, 4
Description of Adjustment Items
Selected item Clock Phase H-Pos V-Pos Description Adjusts vertical noise. Centres the on-screen image by moving it up or down.
· Computer image adjustments can be made easily by pressing AUTO SYNC ( ). See page 34 for details.
(GUI) On-screen Display
Operation
(Select the desired computer input mode with INPUT. )
2
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. 4 Press ß/© to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU.
· To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press ENTER.
31
Computer Image Adjustments (INPUT 1 or 2 mode Only)
Projector Remote control
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are stored, they can be easily selected each time you connect a computer to the projector.
1, 6 2, 3, 4 5
Saving the adjustment setting
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position. )
1 Press MENU.
MOUSE ADJ.
(GUI) On-screen Display 2
2 Press ß/© to select "Fine Sync". 6 To exit from the GUI, press MENU.
Operation
3
Selecting a saved setting
(Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. [. . . ] 12
F
Fit to screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Foot release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 FREEZE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
T
TEMPERATURE WARNING indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP XG-C40XE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP XG-C40XE will begin.