User manual SHARP R-23/25AT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP R-23/25AT. We hope that this SHARP R-23/25AT user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP R-23/25AT (2155 ko)
SHARP R-23/25AT (566 ko)
SHARP R-23/25AT (537 ko)
SHARP R-23/25AT (554 ko)
SHARP R-23/25AT (518 ko)
SHARP R-23/25AT annexe 1 (630 ko)
SHARP R-23/25AT annexe 1 (2155 ko)
SHARP R-23/25AT annexe 1 (2155 ko)
SHARP R-23/25AT annexe 1 (2155 ko)
SHARP R-23/25AT annexe 1 (2155 ko)
SHARP R-23/25AT OPERATION MANUAL (630 ko)
Manual abstract: user guide SHARP R-23/25AT
Detailed instructions for use are in the User's Guide.
[. . . ] A40085 SEEG R25AT O/M
PROFESSIONELLES MIKROWELLENGERÄT FOUR A MICRO-ONDES COMMERCIAL KOMMERCIËLE MAGNETRONOVEN FORNO A MICROONDE COMMERCIALE HORNO MICROONDAS INDUSTRIAL
NUMBER DEF CHECK POWER DOUBLE FILTER %
ON 1 2 3
DEUTSCH FRANÇAIS NEDERLANDS ITALIANO ESPAÑOL
BEDIENUNGSANLEITUNG - Diese Bedienungsanleitung enthält wichtige Informationen, welche Sie vor
Inbetriebnahme des Gerätes unbedingt sorgfältig durchlesen sollten.
D
Achtung:
Die Nichtbeachtung der Gebrauchs- und Serviceanweisungen sowie jeglicher Eingriff, der das Betreiben des Gerätes in geöffnetem Zustand (z. B. geöffnetes Gehäuse) erlaubt, führt zu erheblichen Gesundheitsschäden. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/ EWG. SERVICEABWICKLUNG FÜR DEUTSCHLAND, siehe Seite XX.
MODE D´EMPLOI - Ce mode d´emploi du four contient des informations importantes, que vous devez lire
avant d´utiliser votre four à microondes.
F
Avertissement:
Des risques sérieux pour la santé peuvent être encourus si ces instructions d'utilisation et d'entretien en sont pas respectées ou si le four est modifié de sorte qu'il soit possible de le faire fonctionner lorsque la porte est ouverte. [. . . ] See cooking sequence chart on page 8 for time maximums.
Setting time and power level
Example : Suppose you want to set 4 minutes at 60 % for the 1st sequence and 2 minutes at 30 % for the 2nd sequence for 1 serving in the memory 1. 2 Choose memory number.
NUMBER will flash on and off.
NUMBER
1
3 Touch MANUAL/REPEAT key.
1
4
Enter desired cooking time for 1st sequence.
NUMBER
400
NUMBER
1
5
Touch MICROWAVE POWER SETTING key.
POWER %
1
POWER will flash on and off. 6 Choose desired power level for 1st sequence.
6
NUMBER
POWER %
1
7
Touch MANUAL/REPEAT key.
NUMBER
2
8
Enter desired cooking time for 2nd sequence.
200
NUMBER
2
9
Touch MICROWAVE POWER SETTING key.
NUMBER
POWER %
2
POWER will flash on and off. 10 Choose desired power level for 2nd sequence.
3
X2
NUMBER
POWER %
2
11
Complete memorizing.
NOTE: 1. At Step1, any audible signals will not sound when the SET key is touched first and then an audible signal will sound when the SET key is touched second.
6
SEEG R23AT Eng, P04-12
6
03. 7. 16, 2:55 PM
DEUTSCH
A40085 SEEG R25AT O/M
Setting magnification factor
It is possible to change the magnification factor for double quantity in the memory. Example : Suppose you want to set the magnification factor to 1. 67 for double quantity in memory 1. 2 Choose double quantity.
X
3 Choose memory number.
2
NUMBER
DOUBLE
NUMBER
1
4 Touch MANUAL/REPEAT key.
NUMBER
DOUBLE
DOUBLE
5
Enter magnification factor.
NUMBER
167
6 Complete memorizing.
X2
DOUBLE
NOTE: 1. In case you want to change the magnification factor it must be set for each key separately. At Step 1, any audible signals will not sound when the SET key is touched first and then an audible signal will sound when the SET key is touched second.
MEMORY CHECK
You can check the information programmed into the memory.
Checking time and power level
Example : Suppose you want to know the information programmed into the memory 1, programmed for 4 minutes at 60% at the 1st sequence and 2 minutes at 30 % at the 2nd sequence, and after that the memory 13, programmed for 3 minutes at 70 %. Press key
NUMBER
Display
CHECK
2
Choose memory number.
NUMBER
CHECK POWER % CHECK POWER %
1
NUMBER
1
2
Repeat
3
Choose memory number.
NUMBER
CHECK POWER %
3
4 Cancel checking mode.
X2
1
NOTE: When
is displayed at step 2 or step 3, the memory is not set.
7
SEEG R23AT Eng, P04-12
7
03. 7. 29, 4:24 PM
A40085 SEEG R25AT O/M
Checking the magnification factor
Example : Suppose you want to know the magnification factor for double quantity in memory 1, programmed 1. 67. Press Key
NUMBER
Display
CHECK
2
Choose double quantity.
X
NUMBER
CHECK
2
DOUBLE
3
Choose memory number.
DOUBLE
4
Cancel checking mode.
NOTE: Magnification factor 1. 80 for the double quantity is stored in all memories previously.
MANUAL OPERATION
Your oven can be programmed for up to 3 cooking stages and has 11 preset microwave power levels. Cooking Sequence 1 Stage only Microwave power level that can be used 0-40 % 50-100 % 0-40 % 2 or 3 Stages 50-100 % Cooking time that can be used R-25AT R-23AT Max. NOTE: ) If the time you set exceeds a maximum time, the display will show "EE 9". Use correct number pad after touching MICROWAVE POWER SETTING key ( ). Microwave Power level Number keys
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 9 8 7 6 5 4 3 2 1
0% 0
8
SEEG R23AT Eng, P04-12
8
03. 7. 29, 4:37 PM
DEUTSCH
1
NUMBER
CHECK
A40085 SEEG R25AT O/M
TIME COOKING
Example : Suppose you want to cook for 2 minutes and 30 seconds at 50 %.
2
Choose the manual cooking.
3
0
Touch MICROWAVE POWER SETTING key.
POWER
Enter desired cooking time.
5
Choose desired power level. It is not necessary to touch MICROWAVE POWER SETTING key ( ) for 100 %. If the START key ( ) is not touched within 1 minute after closing the door, the programme will be cancelled. If the time you set exceeds a maximum time, the display will show "EE 9". Touch STOP/CLEAR key (
MULTIPLE SEQUENCE COOKING
Example : Suppose you want to cook for 5 minutes at 70 % and then continue to cook for 20 minutes at 30 %.
5
Choose the manual cooking.
0
0
Touch MICROWAVE POWER SETTING key.
Enter desired cooking time for the 1st stage.
7
3
Touch MICROWAVE Enter desired power level POWER SETTING key. for the 2nd stage.
2
0
0
0
POWER %
Choose desired power Touch MANUAL/REPEAT key. level for the 1st stage.
ON 1
Start to cook.
Check the display.
NOTE: ) for 100 %. When you press START pad, the display will show the total cooking time. [. . . ] If it is cool or luke-warm to the touch, the utensil is suitable for microwave use. Do not perform this test on plastic dishes because the plastic might melt.
15
SEEG R23AT Eng, P13-17
15
03. 7. 16, 2:56 PM
A40085 SEEG R25AT O/M
INFORMATION ABOUT POWER LEVEL
100%-70% power: The high power is perfect for warming up or regenerating food. for rice or noodles) 60%-40% power: For longer cooking times and compact types of food. You can also use it for cooking of very sensitive menus like cheese sauce. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP R-23/25AT
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP R-23/25AT will begin.