User manual SEKONIC L-718 QUICK GUIDE

[. . . ] [. . . ] PRESS F/T TO TOGGLE AND BETWEEN APERTURE SHUTTER PRIORITY MULTI IN FLASH MODES TOGGLES MULTI ON/OFF F/EV TOGGLES BETWEEN EV AND SHUTTER/APERTURE READING FLASH CORD SOCKET WHEN CORD IS ATTACHED PUSH MEASURE BUTTON TO TRIGGER FLASH AND MEASURE LIGHT Basic Operation - Sekonic L-718 On/Off/Battery Check Slide On/Off switch up. Set ISO Hold down ISO button while depressing Up or Down button Use as Reflected Meter Attach Lumigrid or 5° Spot Attachment to Dual Axis Pivot Head Use as Incident Meter Attach Lumisphere to Dual Axis Pivot Head Measure Brightness /Contrast Difference Attach flat Lumidisc to Dual Axis Pivot Head Daylight Reading Select Daylight Mode, depress Measure button Cordless Flash Reading Select Flash Mode, depress Measure button, manually trigger flash Flash Reading Using Flash Cord Select Flash with Cord Mode, insert flash cord, depress Measure button EV Reading Select Daylight Mode, depress F/EV Button to see EV Select Shutter or Aperture Priority Select Daylight Mode. Analog scale is shown in Shutter Priority mode Multi Flash Reading in either flash mode, select Multi to read up to 9 consecutive flashes Display Light Press Display Light (D. L. ) button at any time to illuminate readouts Dual Axis Pivot Head Pivot Receptor Head in any direction for easiest reading of display and best positioning of receptor PRINTED IN USA [. . . ] [. . . ]