User manual SANYO PLCXU32
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO PLCXU32. We hope that this SANYO PLCXU32 user guide will be useful to you.
Manual abstract: user guide SANYO PLCXU32
Detailed instructions for use are in the User's Guide.
[. . . ] Multimedia Projector
MODEL
PLC-XU32 PLC-XU37
Owner's Manual
TO THE OWNER
Before operating this projector, read this manual thoroughly and operate the projector properly. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "TROUBLESHOOTING" section at the end of this booklet. [. . . ] (kHz) 61. 00 35. 522 46. 90 47. 00 58. 03 60. 24 68. 68 64. 20 62. 50 63. 90 63. 34 63. 74 71. 69 81. 13 63. 98 79. 976 60. 00 61. 20 71. 40 50. 00 50. 00 63. 37 76. 97 61. 85 46. 43 63. 79 75. 00 80. 00 45. 00 33. 75 33. 75 28. 125
V-Freq. (Hz) 75. 70
86. 96 (Interlace)
58. 20 58. 30 72. 00 75. 08 75. 06 70. 40 58. 60 60. 00 59. 98 60. 01 67. 19 76. 107 60. 02 75. 025 60. 00 65. 20 75. 60
86. 00 (Interlace) 94. 00 (Interlace)
60. 01 72. 00 66. 00
86. 70 (Interlace)
60. 18 75. 08 75. 08 60. 00
60. 00 (Interlace) 60. 00 (Interlace) 50. 00 (Interlace)
77. 07
When a input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN DISPLAY
RESOLUTION
H-Freq. (Hz)
D-VGA D-SVGA D-XGA
640 x 480 800 x 600 1024 x 768
31. 469 37. 879 48. 363
59. 940 60. 317 60. 004
D-SXGA 1 D-SXGA 2 D-SXGA 3
1280 x 1024 1280 x 1024 1280 x 1024
63. 981 60. 276 31. 65
60. 020 58. 069 29. 8
NOTE : Specifications are subject to change without notice.
23
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adj.
1 2
Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to PC ADJUST Menu icon. button on Remote Control Unit.
PC ADJUST MENU
PC ADJUST Menu icon
Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in PC SYSTEM Menu (P22). Refer to step 3 of MANUAL PC ADJUSTMENT section (P26).
Move a red frame pointer to AUTO PC Adj. icon and press SELECT button.
NOTE
G Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26. ) G Auto PC Adjustment function cannot be operated when "RGB, " "720p (HDTV), " "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P22).
24
COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by MultiScan system of this projector. If this happens, projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be operated when the input signal is digital or "RGB" is selected on PC SYSTEM MENU (P22).
1 2
Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to PC ADJUST Menu icon. Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. Fine sync
PC ADJUST MENU
PC ADJUST Menu icon
Move a red frame icon to the item and press SELECT button.
Adjusts an image as necessary to eliminate flicker from the display. Press POINT LEFT/RIGHT button to adjust value. (From 0 to 31. ) Total dots The number of total dots in one horizontal period. [. . . ] (See "SETTING" section on page 35. )
Picture is Left/Right reversed. No image.
G Check Display feature. (See "SETTING" section on page 35. )
G Check the connection between your computer or video equipment and a projector. G When turning a projector on, it takes about 30 seconds to display an image. G Check the system that you select is corresponding with your computer or video equipment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO PLCXU32
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO PLCXU32 will begin.