Detailed instructions for use are in the User's Guide.
[. . . ] Multimedia Projector
MODEL
Network Supported
WiredLAN 100-Base-TX/10-Base-T RefertotheOwner'sManualsbelowfor detailsaboutnetworkfunction. NetworkSet-upandOperation PJNetworkManager
PLC-XU300 PLC-XU350 PLC-XU300K PLC-XU350K
Owner's Manual
Features and Design
ThisMultimediaProjectorisdesignedwiththemostadvancedtechnologyforportability, durability, andeaseofuse. Thisprojectorutilizesbuilt-inmultimediafeatures, apaletteof16. 77millioncolors, andmatrixliquidcrystaldisplay (LCD)technology.
Compact Design
Security Function
The Security function helps you to ensure security of the projector. With the Key lock function, you can locktheoperationonthetopcontrolorremotecontrol (p. 54). [. . . ] ·True, Full, andDigital zoom +/cannotbeselectedwhen480i, 575i, 480p, or575pisselectedinthePC SystemMenu(p. 29).
35
Computer Input
Custom Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom and the Custom is displayedonthescreen, youcanusethePointed buttons tochoosetheitemyouwanttoadjust. When set to On, the aspect ratio is fixed. TheScale Vappearsdimmedand becomes unavailable. Adjust Scale H, then the screen scale is automatically modifiedbasedontheaspectratio. For zooming in and out the images Digital zoom + SelectDigital zoom +. TheOn-ScreenMenudisappearsand D . zoom +appears. PresstheSELECTbuttontoexpandthe imagesize. UsethePointed7 8buttonstopantheimage. A projected image can be also expanded by pressing the D. ZOOMeortheSELECTbuttonontheremotecontrol. Digital zoom SelectDigital zoom . TheOn-ScreenMenudisappears andD . Theprojectedimagecanbealsocompressedbypressing theD. ZOOMdortheSELECTbuttonontheremotecontrol. ToexittheDigitalzoom+/mode, pressanybuttonexcept theD. ZOOMedandtheSELECTbuttons. To return to the previous screen size, select a screen size from the Screen SizeAdjustment Menu or select an input source from the Input Source Selection Menu (see pages 27-28) again, or adjust the screen size with the D. ZOOM
edbuttons. SELECT button
Note:
·When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. ·TheadjustablerangeforScale H/Vand Position H/Vislimiteddependingonthe inputsignal.
Remote Control
POINT buttons
D . ZOOM + button D . ZOOM - button
Note: ·The panning function may not operate properly if the stored Mode in the PC AdjustMenuisused(p. 32). ·Theminimumcompressionratioislimited depending on the input signal, when the Keystonefunctionisworkingorwhenthe customisselectedforthescreensize. ·True, Full, andDigital zoom +/cannot be selected when 480i, 575i, 480p, or 575pisselectedinthePCSystemMenu (p. 29). ·Digital zoom +/-cannotbeselected whenFullorTrueisselected.
36
Video Input
Input Source Selection (Video, S-video)
Direct Operation
ChooseVideoorS-videobypressingtheINPUTbuttonon the top control, or the VIDEO button or the S-video button ontheremotecontrol. Before using INPUT button, correct input source should be selectedthroughmenuoperationasdescribedbelow.
INPUT button Computer 1(RGB) / (Component) / (RGB(Scart)) Computer (RGB) Video S-video
Top Control
Remote Control
VIDEO button Video S-video button S-video
Menu Operation
1
PresstheMENUbuttontodisplaytheOn-Screen Menu. UsethePointedbuttonstoselectInputand thenpressthePoint8 ortheSELECTbutton. UsethePointedbuttonstoselecteitherVideoor S-videoandthenpresstheSELECTbutton.
Input Menu
Video
When video input signal is connected to the VIDEOjack, selectVideo. When video input signal is connected to the SVIDEOjack, selectS-video.
S-video
Note: WhentheInputSearchfunctionissettoOn1orOnin theAutosetupfunction, theinputsignalwillbesearched automatically(p. 45).
37
Video Input Input Source Selection (Component, RGB Scart 1-pin)
Direct Operation
ChooseComputer 1(Component) orComputer 1(Scart)bypressingtheINPUTbuttononthetopcontrolor presstheCOMPUTER1ortheCOMPONENTbuttonontheremotecontrol. Before using INPUT button, correct input source should be selected through Menu operation as described below.
Remote Control
COMPUTER 1 button Computer 1(RGB) Computer 1(Scart)
Top Control
INPUT button Computer 1(RGB) / (Component) / (RGB(Scart)) Computer (RGB) COMPONENT button Computer 1 (Component) Video S-video
Menu Operation
1 3
Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and thenpressthePoint8ortheSELECTbutton. UsethePointedbuttonstoselectComponentor RGB(Scart)andthenpresstheSELECTbutton.
Input Menu
Component
Whentheinputsourceiscomingfromvideo equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGACable, selectComponent.
RGB (Scart)
Whentheinputsourceiscomingfromvideo equipment connected to the COMPUTER IN1/COMPONENTINterminalwithaScartVGACable, selectRGB (Scart).
Note: WhentheInputSearchfunctionissettoOn1orOn, theinputsignalwillbesearchedautomatically(p. 45).
38
Video Input Video System Selection
1 3
PresstheMENUbuttontodisplaytheOn-Screen Menu. UsethePointedbuttonstoselectInputand thenpressthePoint8ortheSELECTbutton. [. . . ] Makesureyouarenottoofarfromtheprojectorwhenusingthe remotecontrol. Maximumoperatingrangeis16. 4'(5m). Makesurethecodeoftheremotecontrolisconformedtothe projector'scode. Seepage53. Checkthestatusoftheprojectorwithreferringto"Indicators and projector Condition". Seepage70. Unable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock .
ThetopcontrolisnotavailableifthetopcontrolislockedatKey lock underSecurityofSETTINGsection. Seepage54. [. . . ]