User manual SANYO PDG-DET100 CABINET DRAWING
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO PDG-DET100. We hope that this SANYO PDG-DET100 user guide will be useful to you.
Manual abstract: user guide SANYO PDG-DET100CABINET DRAWING
Detailed instructions for use are in the User's Guide.
[. . . ] 10 IMAGE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 D. ZOOM + Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 D. ZOOM Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 POINTER RIGHT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Example of Functional Execution Command: "C05" [CR] Example of Status Read Command: "CR0" [CR] 0û It clears the information of buffer in the following cases. (Until receiving the carriage return after the reception of the first data. ) 0û When pipelining control commands, allow interval time as below after the reception of response, . 1) [ZOOM UP/DOWN] [FOCUS UP/DOWN] [LENS SHIF UP/DOWN/LEFT/ RIGHT] commands. . . 100ms 2) Other commands. . . 500ms 0û 0û When pipelining Status Read command, allow at least 500ms of interval time after the response. Do not issue any command before receiving the response except the case that there is no response for 5 seconds. 0û It takes about 7 seconds for internal initialization after plugging in AC. 0û For 7 seconds after starting POWER ON in the status of STANDBY, the projector returns "Acceptable" response, but it does not carry out the command. carried out in 500 ms after the "Acceptable" response is returned. 0û About the behavior during Count Down and Cooling Down operation; in the period of the Count Down operation after Power ON or Cooling Down after Power OFF, "Acceptable" response is returned, but the command is not carried out except for Status Read command. 0û About the behavior during switching inputs; it takes 5 seconds to switch inputs after receiving the command. During this period, even if another command is received, it is not carried out although returning "Acceptable" response. However, Status Read commands are carried out in 500 ms after the "Acceptable" response is returned. This command works the same way as "" button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Response
6. 25
ENTER Command
COMMAND Detail Response "C3F" [CR] This command works the same way as "SELECT" button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR]
11/23
PDG-DET100 Basic Serial Command Functional Specifications
6. 26
FREEZE ON Command
COMMAND Detail "C43" [CR] Freeze on-screen picture This command works the same way as "FREEZE" button of the remote control, but it works only for turning on, not for turning off Freeze. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Response
6. 27
FREEZE OFF Command
COMMAND Detail "C44" [CR] Cancel Freeze function This command works the same way as "FREEZE" button of the remote control, but it works only for turning off, not for turning on Freeze. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Response
6. 28
ZOOM + Command
COMMAND Detail "C47" [CR] Make screen image larger This command works the same way as "ZOOM" button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Response
6. 29
ZOOM COMMAND
COMMAND Detail "C46" [CR] Make screen image smaller This command works the same as "ZOOM " button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Response
6. 30
FOCUS + Command
COMMAND "C4B" [CR] Adjust focus of screen image (sharp and clear) with a long-focal-length ("=) (The lens direction is backward) This command works the same way as "FOCUS " button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Detail
Response
12/23
PDG-DET100 Basic Serial Command Functional Specifications
6. 31
FOCUS Command
COMMAND "C4A" [CR] Adjust focus of screen image (sharp and clear) with a short-focal-length (The lens direction is forward) This command works the same way as "FOCUS " button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR]
Detail
Response
6. 32 LENS SHIFT UP Command
COMMAND Detail Response "C5D" [CR] Move screen image upward Acceptable Unacceptable [ACK] [CR] "?" [CR]
6. 33
LENS SHIFT DOWN Command
COMMAND Detail Response "C5E" [CR] Move screen image downward Acceptable Unacceptable [ACK] [CR] "?" [CR]
6. 34 LENS SHIFT LEFT Command
COMMAND Detail Response "C5F" [CR] Move screen image to the left. Acceptable Unacceptable [ACK] [CR] "?" [CR]
6. 35
LENS SHIFT RIGHT Command
COMMAND Detail Response "C60" [CR] Move screen image to the right. Acceptable Unacceptable [ACK] [CR] "?" [CR]
6. 36
AUTO PC ADJ. [. . . ] The status is kept until the next operation starts.
0û
"88" [CR]
Status: Standby after Cooling Down due to Abnormal Temperature This value is returned when Cooling Down operation due to Abnormal Temperature has been completed and the status has been moved to Standby. The status is kept until the next operation starts.
0û
"2C" [CR]
Status: Cooling Down in process due to Shutter management function This indicates it has moved to Cooling down status according to the setting of Shutter Management function in setting menu. During this time, Functional Execution Commands are not accepted.
0û
"88" [CR]
Status: Standby after Cooling Down due to Shutter management function This value is returned when Cooling Down operation due to Shutter management has been completed and the status has been moved to Standby. When projector is turned on again, it cancels the last status and starts normal operation.
18/23
PDG-DET100 Basic Serial Command Functional Specifications
7. 4
Input Mode Read Command
COMMAND Detail "CR1" [CR] Get currently selected SLOT Acceptable "%1" [CR] "1" = Input 1 is selected "2" = Input 2 is selected "3" = Input 3 is selected "4" = Input 4 is selected (In the case SLOT method, SLOT 1~4 is selected. ) "?" [CR]
Response
%1
Unacceptable
7. 5
Lamp Time Read Command
COMMAND Detail "CR3" [CR] Get total lamp running hours Acceptable "%1_%2" [CR] Each lamp data follows in sequence with one space between each of them. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO PDG-DET100
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO PDG-DET100 will begin.