User manual SANYO BIG-100K
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO BIG-100K. We hope that this SANYO BIG-100K user guide will be useful to you.
Manual abstract: user guide SANYO BIG-100K
Detailed instructions for use are in the User's Guide.
[. . . ] (See page 42. )
Compatibility
The projector widely accepts various video and computer input signals including; Computers, 6 Color systems, Component video, S-video and RGB scart.
Blackboard Function
Blackboard can be used as a projection screen.
The board color is limited to Green.
(See page 29 and 35. )
Simple Computer System Setting
The projector has the Multi-scan system to conform to almost all computer output signals quickly. (See page 26. )
Film Function
The Film function reproduces pictures faithful to the original film quality from 3:2 pull-down video contents. (See page 37. )
Digital Zoom (for Computer)
The digital zoom function expands (to approx. 16 times of screen size) or compress the image size, allowing you to focus on crucial information at a presentation. [. . . ] Blackboard(Green) Picture level suitable for the image projected on a blackboard (Green). This is mainly effective on a green colored board, not truly effective on a black colored board. IMAGE button Standard Real Blackboard(Green) Image 1 Image 2 Image 3 Image 4
Computer Input
Menu Operation
Image Select Menu icon
1 2
Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. Press the Point d button to move the red frame pointer to the level that you want to set and then press the SELECT button. Standard
Image Select Menu
Move the red frame pointer to the level and press the SELECT button.
Normal picture level preset on this projector. Real Picture level with improved halftone for graphics.
The level being selected.
Blackboard(Green) Picture level suitable for the image projected on a blackboard (Green). Image 1~4 User preset image in the Image Adjust Menu (p30).
29
Computer Input
Image Level Adjustment
1 2
Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. Press the Point d button to move the red frame pointer to the item that you want to adjust, and then press the SELECT button. Contrast
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to the item to be selected and then press the SELECT button.
Press the Point 7 button to decrease contrast and the Point 8 button to increase contrast. · The True and Digital zoom +/ cannot be selected when "480i", "575i", "480p", or "575p" is selected in the PC System Menu (p25). · This projector cannot display any resolution higher than 1280 X 1024. If your computer's screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting to the projector. · The image data in other than XGA (1024 x 768) is modified to fit the screen size in initial mode. · The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used.
Computer Input
31
Video Input
Input Source Selection (Video, S-Video)
Direct Operation
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Video Computer 1 Computer 2 VIDEO button Video
See Note on the bottom of this page.
Input Menu icon
Menu Operation
Input Menu
1 2 3
Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. Press the Point d button to move the red arrow pointer to Video and then press the SELECT button. Move the pointer to the source that you want to select and then press the SELECT button.
Move the pointer to Video and press the SELECT button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select and press the SELECT button.
Auto
When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. [. . . ] (See page 15. ) Check cable connection between the projector and your computer. (See page 15. )
WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. We will advise you how to obtain service.
The CE Mark is a Directive conformity mark of the European Community (EC).
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO BIG-100K
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO BIG-100K will begin.