User manual SAMSUNG SR8980

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SR8980. We hope that this SAMSUNG SR8980 user guide will be useful to you.


SAMSUNG SR8980 : Download the complete user guide (16316 Ko)

Manual abstract: user guide SAMSUNG SR8980

Detailed instructions for use are in the User's Guide.

[. . . ] SR8980 Vacuum Cleaning Robot user manual This manual is made with 100% recycled paper. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register safety information SAFETY INFORMATION · Before operating the appliance, please read this manual thoroughly and retain it for your reference. · Because these following operating instructions cover various models, the characteristics of your WARNING vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED WARNING Indicates that a danger of death or serious injury exists. [. . . ] If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging. To turn the power on again, press and hold the power (Start/Stop) button on the main body. Using the remote control Starting or stopping cleaning Starting - Remote control : Press the Auto, Spot, Max, Manual button. Main unit : Select Auto, Spot, Max mode by using the ( and then pressing the ( ) button. ) button When cleaning begins, the vacuum cleaning robot starts to move. ) button without selecting cleaning mode starts Pressing the ( to perform the Auto mode cleaning. When cleaning is stopped, the vacuum cleaning robot stops. Using the main unit buttons 28_ operating Recharging You can have the vacuum cleaning robot return to the charger to charge the battery by using the Recharging button. ) When the vacuum cleaning robot is operating, press the ( button to cancel the operation and press the Recharging button. ") is displayed on the display panel and the vacuum - (" cleaning robot returns to the charging station for recharging. To stop the vacuum cleaning robot while it is returning to the charger, press the ( ) button. To test the auto charge function, press the Recharging button when the vacuum cleaning robot is less than 1. 5m from the charger. Using the remote control Troubleshooting when the vacuum cleaning robot does not return to the charger - Check the installation of the charger - When the charger is in a location where the charger cannot guide the vacuum cleaning robot to the charger. : It may require a longer time for the vacuum cleaning robot to return to the charger. - When the vacuum cleaning robot is trapped by an obstacle (furniture etc. ) - When the vacuum cleaning robot cannot pass over the doorsill to the location where the charger is installed. Using the main unit buttons 1. 5m ah ea d operating _29 Auto Cleaning The vacuum cleaning robot will move by itself and automatically clean the house until cleaning is completed once. If you press the Start/Stop button on the main unit or remote control without selecting a cleaning mode, an automatic cleaning run starts. If cleaning begins when the vacuum cleaning robot is docked with the charger station, the time to return to the charger is decreased since the vacuum cleaning robot remembers its original position while moving. If the vacuum cleaning robot starts the current cleaning run at a location other than the charging station and fails to locate the charging station while cleaning, it will stop near the location where it started cleaning. If the battery level becomes too low while cleaning, the vacuum cleaning robot will automatically return to the charger station and resume cleaning after charging its battery. (Number of cleaning operations resumed : Once) Main unit button Remote control button Configuration Sequence 1. Cancel the mode. Normal Mode NOTE About the Resume Cleaning function · If the vacuum cleaning robot has evaluated that cleaning is complete, the resume cleaning function is not performed. · If you move the vacuum cleaning robot when it is being charged or press a button, the vacuum cleaning robot judges cleaning to be complete and does not resume cleaning. · Do not move the vacuum cleaning robot when it is cleaning or press a button while it is cleaning. Otherwise, the vacuum cleaning robot judges cleaning to be complete and starts cleaning again from the beginning. · Each time you press the Turbo button, the Turbo icon on the display panel is turned on or off sequentially. When the Turbo icon is turned on, you can start cleaning in Turbo mode. [. . . ] · Check the Bumper sensor. SOLUTION · Turn off the Power Switch at the bottom and move the vacuum cleaning robot to a different location. · Turn off the Power Switch at the bottom and remove the foreign substance from the power brush. · Turn off the Power Switch at the bottom and remove the foreign substance from the left driving wheel. · Turn off the Power Switch at the bottom and remove the foreign substance from the right driving wheel. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SR8980




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SR8980 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.