User manual ROSE DISPLAYS ANOMULTI ROUND WITH MULTICLIPS

[. . . ] AnoMultiTM Instruction Sheet Parts AnoMulti 12AM300R MultiClips 1UP-0101 End Caps 06-5525 Instructions for Hanging Step 1 Insert the poster into the Slim Holder by either sliding the poster into the holder or tapping the holder onto the poster. 1 Note: For thinner substrates, it may be necessary to staple the edge of the graphic before inserting into Slim Holder. Step 2 Slide Slim holder into AnoMulti holder. [. . . ] 1 Note: For thinner substrates, it may be necessary to staple the edge of the graphic before inserting into Slim Holder. Step 2 Slide Slim holder into AnoMulti holder. 2 Figure 1 Figure 2 Step 3 Squeeze sides of MultiClip together. Fig. 3 Step 4 Align the bottom rail of the MultiClip with the top channel of the aluminum holder. 6 Important note: Please save and reuse the AnoMulti holder, End caps and MultiClips for future projects. Figure 5 Figure 6 The AnoMultiTM and SlimTM are trademarks of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoMultiMC 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-7. 31. 02 AnoMultiTM Instruction Sheet Parts AnoMulti 12AM300R MultiClips 1UP-0101 End Caps 06-5525 Instructions for Hanging Step 1 Insert the poster into the Slim Holder by either sliding the poster into the holder or tapping the holder onto the poster. 1 Note: For thinner substrates, it may be necessary to staple the edge of the graphic before inserting into Slim Holder. Step 2 Slide Slim holder into AnoMulti holder. 2 Figure 1 Figure 2 Step 3 Squeeze sides of MultiClip together. Fig. 3 Step 4 Align the bottom rail of the MultiClip with the top channel of the aluminum holder. 4 Repeat steps 3 & 4 for second MultiClip. Figure 3 Figure 4 Step 5 Push end caps into place. 6 Important note: Please save and reuse the AnoMulti holder, End caps and MultiClips for future projects. The AnoMultiTM and SlimTM are trademarks of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ] 6 Important note: Please save and reuse the AnoMulti holder, End caps and MultiClips for future projects. Figure 5 Figure 6 The AnoMultiTM and SlimTM are trademarks of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]