User manual PYRAMID PW677X DATASHEET

[. . . ] The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for PW677X. Step Checking the contents of the box 1 or Strap LI-70B Lithium Ion Battery Digital camera USB cable AV cable ib CD-ROM F-2AC USB-AC adapter Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Step Preparing the Camera "Preparing the Camera" (p. 10) 2 4 Step Shooting and Playing Back Images "Shooting, Viewing, and Erasing" (p. [. . . ] Press the H button. X DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. DPOF reservations set by another DPOF device cannot be changed by this camera. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. NO DATE TIME BACK MENU SET OK 5 Use FG to select the [X] (date print) screen option, and press the H button. Submenu 2 Application This prints the image only. This prints the image with the shooting time. PRINT ORDER 1 ( 1) Single-frame print reservations [<] NO DATE TIME 1 2 Display the [SETUP] menu. "Using the Menu" (p. 4) From the playback menu q, select [PRINT ORDER] and then press the H button. PRINT ORDER SET CANCEL BACK MENU SET OK < U 6 SET OK Use FG to select [SET], and press the H button. EXIT MENU 40 EN Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 2 3 Follow Steps 1 and 2 in [<] (p. Follow Steps 5 and 6 in [<]. 1 2 3 4 Follow Steps 1 and 2 in [<] (p. Use HI to select the image with the print reservation you want to cancel. If necessary, repeat Step 4, and then press the H button when finished. Use FG to select the [X] (date print) screen option, and press the H button. The settings are applied to the remaining images with the print reservation data. Resetting all print reservation data 1 2 Follow Steps 1 and 2 in [<] (p. Use FG to select either [<] or [U], and press the H button. PRINT ORDER SETTING PRINT ORDERED RESET KEEP BACK MENU SET OK 5 6 7 3 Use FG to select [SET], and press the H button. Use FG to select [RESET], and press the H button. EN 41 Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Monitor "Difficult to see". Condensation*1 may have occurred. Do not operate the printer while making the print settings on the camera. This camera may be unable to print images taken by other cameras. MEMORY SETUP POWER OFF MEMORY FORMAT SET OK NO PICTURE PICTURE ERROR THE IMAGE CANNOT BE EDITED BATTERY EMPTY Battery problem Charge the battery. NO CONNECTION Connection problem Connect the camera and computer or printer correctly. Printer problem Load paper into the printer. NO PAPER EN 43 Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. Fast-moving object Focusing "Focusing on the subject" Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. 14) The subject is not in the center of the frame Camera shake "Taking pictures without camera shake" Set [AF MODE] (p. 28) The camera tracks the subject movement automatically to focus on it continuously. Taking pictures using N mode (p. 20) (FE-4020/X-940) Taking pictures using [IMAGE STABILIZER] (p. 28) (PW677X) Taking a picture of subjects where autofocus is difficult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot, and take the picture. Select C (SPORT) in s mode (p. 20) The C (SPORT) mode uses a fast shutter speed and can reduce the blur incurred by a moving subject. Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a flash cannot be used. 25) Subjects with low contrast Exposure (brightness) When extremely bright objects appear in the center of the screen "Taking pictures with the right brightness" Taking pictures using [FILL IN] (p. 23) flash A subject against backlight is brightened. Taking pictures using exposure compensation (p. 24) Object with no vertical lines*1 *1 It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture. Adjust the brightness while viewing the screen for taking the picture. [. . . ] This Guarantee is valid only if the Guarantee Certificate and proof of purchase are presented at the Olympus repair service station. Please note that this Guarantee is in addition to and does not affect the customer's legal warranty rights under the applicable national legislation governing the sale of consumer goods mentioned above. 2 This Guarantee does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the Guarantee period referred to above. Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. ) b. [. . . ]