User manual PRIMA PIC003

[. . . ] Low Voltage Directive 73/23/EEC and, where appropriate all modifications & amendments thereto. Prima International Plc, Prima House, Premier Park, Oulton, LEEDS LS26 8ZA, United Kingdom Ice Crusher Model: PIC003 1. 9. IMPORTANT SAFEGUARDS Read all instructions before using the product To protect against risk of electrical shock do not immerse product in water or other liquid. [. . . ] Close supervision is necessary when this product is used by or near children. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. Do not operate product with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliances to the nearest authorised service facility for examination, repair or electrical or mechanical adjustment. The use of attachments not recommended or sold by manufacturer may cause, fire electric shock or injury. Do not place product on or near a hot burner or any other kind of heating device. Place the Ice Crusher on a level, non-slip surface Insert the mains wall socket (220-240V) Remove the clear plastic lid Using the ice scoop provided put 3 or 4 ice cubes into the hinged ice filler compartment. Note: The size of the cubes should not be more than the standard 1" x 1" x 1" (25 x 25 x 25cm) variety. Note that the switch will spring back into the off position if you let go of it, so you need to hold the switch in the on position until all the ice has been processed. Repeat the process until you have crushed enough ice for your needs or until the ice collection bowl is full. Important safety note: never put your fingers or any utensil into the processing chamber to free any trapped ice 5. Wipe outside of the appliance with a paper towel or a soft cloth moistened with a little water. [. . . ] Wipe outside of the appliance with a paper towel or a soft cloth moistened with a little water. Do not clean the inside or outside with any abrasive scouring pad or steel wool as this will damage the finish. [. . . ]