User manual PIONEER XW-NAW1-K

[. . . ] Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. [. . . ] Hangitonthewall: The back of the XW-NAW1-K has two mounting holes that fit over screws of article on the market (refer to page 7). Position one of the legs over one of the recessed areas on the back of the XW-NAW1-K as shown. Insert the leg into the recessed area and press upward to lock it in place. Wall mounting XW-NAW1-K to a wall XW-NAW1-K is can be mounted on a wall if desired. caution · RememberthatXW-NAW1-Kisheavyandthatitsweightcould cause the screws to work loose, or the wall material to fail to support it, resulting in XW-NAW1-K falling. Usescrewssuitableforwall material and support the weight of XW-NAW1-K. Once you've found a place for your XW-NAW1-K, you're just a step or two away from experiencing the music from your iPod like you've never heard it before. All you have to do is insert any iPod with 30-pin dock connector into the universal dock of the XW-NAW1-K. You can use it to listen to other audio sources or send the video from your iPod to a display. Insert the cable of the AC adapter into the DC IN jack on the bottom of the XWNAW1-K. Caution Do not insert the power plug in the wall outlet without attaching it to the AC adapter. ⷠAshortcircuitmayresultifa metal piece gets in the space between the electrodes or an electric shock may result when pulled out from the outlet. Confirm what iPod models are supported This system is compatible with the audio and video of the iPod nano third generation and above, iPod classic, iPod touch and iPhone. Find the insert that goes with your iPod model (or use the insert that came with your iPod). The models compatible with each insert are listed in one of the corners on the top of the insert. The back of the insert should rest on the ridge just behind the dock on the XW-NAW1-K. Push down gently until the iPod rests firmly in the insert and on the dock. Also brings a docked iPod out of sleep mode when the XW-NAW1-K turns on. (Skipback)Goes to the previous track (or to the beginning of the song currently playing) in the current playlist on your docked iPod. (Skipforward)Goes to the following track in the current playlist on your docked iPod. [. . . ] If there still is no sound, remove the iPod from the docking port, turn the XW-NAW1-K off, unplug the unit from the wall outlet, wait one to two minutes, and then plug the AC adapter back into the wall outlet, turn the XW-NAW1-K back on, put your iPod into the dock, and try the above steps again. Remove the iPod from the docking port and reattach it, making sure that there is a secure fit between the iPod and the docking port. ⷠMake sure that there is a clear path between the remote control and the remote sensor on the unit, and make sure that you are pointing the remote control directly at the remote sensor on the unit. If not inserted properly, realign the battery to fit securely into the compartment. [. . . ]