User manual PIONEER XR-P330M

[. . . ] Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket. [. . . ] The setting is displayed on the front panel display. 83 En 08 KURO LINK Canceling synchronized amp mode Before using synchronization Once you have finished all connections and settings, you must: 1 Put all components into standby mode. · When the synchronized amp mode is canceled, the receiver's power turns off if you were viewing an HDMI input or a TV program on the TV. · When in the synchronized amp mode, the synchronized amp mode is canceled when the receiver's power is turned off. To turn the synchronized amp mode back on, select the synchronized amp mode using the TV's remote control. · When in the synchronized amp mode, the synchronized amp mode is canceled if an operation that produces sound from the TV is performed from the TV's menu screen, if the receiver's HDMI output setting is changed, etc. 2 Turn the power on for all components, with the power for the flat screen TV being turned on last. 3 Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not. 4 Check whether the components connected to all HDMI inputs are properly displayed. Synchronized amp mode The synchronized amp mode can be set from the KURO LINK-compatible TV's remote control. See the explanation below for operations in the synchronized amp mode. For more information, refer to the operating instructions of the KURO LINK-compatible TV. Synchronized amp mode operations When using the synchronized amp mode, the KURO LINK-compatible component connected to the receiver operates in sync as described below. · The receiver's volume can be set and the sound can be muted using the TV's remote control. · When the TV's power is set to standby, the receiver's power is also set to standby. (Only when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV) · The receiver's input switches automatically when the KURO LINK-compatible component is played. Dual mono is not widely used, but is sometimes necessary when two languages need to be sent to separate channels. CH1 ­ Channel 1 is heard only CH2 ­ Channel 2 is heard only CH1 CH2 ­ Both channels heard from front speakers 85 En 09 Using other functions Setting DRC (Dynamic Range Control) What it does Adjusts the level of dynamic range for movie soundtracks optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and DTS-HD Master Audio (you may need to use this feature when listening to surround sound at low volumes). Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultralow bass tones from distorting the sound from the speakers. The LFE is not limited when set to 0 dB, which is the recommended value. When set to ­5 dB, ­10 dB, ­15 dB or ­20 dB, the LFE is limited by the respective degree. Brings out detail in SACDs by maximizing the dynamic range (during digital processing). Specifies the routing of the HDMI audio signal out of this receiver (amp) or through to a TV or flat screen TV. This feature automatically corrects the audio-to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The video delay time is automatically adjusted according to the audio delay time. h Provides a better blend of the front speakers by spreading the center channel between the front right and left speakers, making it sound wider (higher settings) or narrower (lower settings). Option(s) AUTO MAX MID OFF e Setting C. IMAGEj What it does Option(s) Adjusts the center image to 0 to 10 create a wider stereo effect with (Center Defaults: vocals. Adjust the effect from 0 Image) Neo:6 MUSIC: 3 (Applicable (all center channel sent to front Neo:6 only when right and left speakers) to 10 CINEMA: 10 (center channel sent to the center using a speaker only). [. . . ] By unmasking the audio details, typically lost by other playback modes, audiences will experience the deep ambience and subtle details of movies, music and games. Neural-THX® Digital MusicTM is a new surround mode specifically designed to enhance the playback of compressed digital music content. It provides listeners with an expanded sound stage and clean surround experience, even with compressed audio sources such as MP3s and Internet streams. Neural-THX Surround has been chosen as the official surround sound format for TV sports broadcasting, 7. 1 games, Music Direct Internet streaming as well as leading FM/HD radio stations worldwide. [. . . ]