User manual PIONEER X-SMC5-K

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side). Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. [. . . ] Auto tuning stops after the FM band has finished, or the limit of 9 presets has been reached. There are two ways to do this: Automatic tuning - To search for stations, press and hold TUNE +/­ for about a few seconds. This unit will start searching for the next station, stopping when it has found one. You can save up to 9 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. 1 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwritten with the new one. Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. If the sound is distorted after you lower the volume of the unit, try lowering the volume on the auxiliary playback component. Connect the front panel AUX IN mini-plug jack to your auxiliary playback component. ⷠThis method can be used to play music on this unit from iPods/iPhones that do not support use of an iPod Dock. When Auto mode select is set to Power Save mode, if the function is set to AUX but no input is connected to the AUX IN connector and no other control operation is performed for 30 minutes, the unit will automatically turn off. This unit's front panel The factory default settings are indicated in italic. What it does Setting the wake-up timer and the time the unit will be turned on. When On (Standby) is selected, the clock will appear in the sub-display even when the power is set to Off. If you are in Hawaii (GMT -10:00), use / to select Hawaii and press ENTER. When Auto is selected, the network type is automatically switched between Wired and Wireless. The name of this system displayed on a computer or other device connected to the network can be changed. (page 39) When Power Save mode is selected, the unit will be automatically in the standby mode if no operation has done for more than 30 minutes. When Demo Mode is selected, the demonstration screen will start if no operation has done for more than 5 minutes. change the language of the operation messages displayed on the main display. Other languages: French, German, Netherlands, Italian, Spanish, Russian, Japanese When this is set to On, the time required for bootup will be shortened. in addition , power-on will occur simultaneously when AirPlay is performed. Note, however, that when Quick Start Mode is set to On, the electrical current consumed in the power-off (standby) mode will be about the same as that required when the power is turned on. [. . . ] Digital Living provides consumers with easy sharing of digital media through a wired or wireless network in the home. The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines. When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Even when encoded in a compatible format, some files may not play correctly. [. . . ]