User manual PIONEER X-SMC1-W

[. . . ] Fm 1 ページ ２０１１年１１月２９日　火曜日　午後１時３７分 X-SMC1-K/-S/-W Slim AV Micro System Système AV Compact Sistema Micro Slim AV Discover the benefits of registering your product online at http://www. Book 2 ページ ２０１１年６月１５日　水曜日　午後４時４４分 IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. [. . . ] español 2 Press ENTER continuously to select the PIN code . € Each time / is pressed the item on the front panel display changes accordingly. 2 Turn on the Bluetooth wireless technology device that you want to pair, place it near the system and set it into pairing mode. 3 Check to see that the Bluetooth® adapter is detected by the Bluetooth wireless technology device. € If the Bluetooth wireless technology device cannot be connected to the unit, perform the connection operation from the Bluetooth wireless technology device. 1 When the Bluetooth® adapter is not connected and BT AUDIO is selected as the input source, the error message noAdP. 2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth® adapter. € To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device. Book 20 ページ ２０１１年６月１５日　水曜日　午後４時４４分 06 Bluetooth® Audio playback (optional) Listening to Music Contents of Bluetooth wireless technology device 1 Press FUNCTION / or BT AUDIO on the front panel of the unit to select BT AUDIO as the input source. is shown on the AIR JAM Air Jam – a Pioneer-exclusive application and available for free. Air Jam lets you connect multi compatible devices to this unit using Bluetooth wireless technology. With it, you can make a group playlist directly on a supported device to play in your home theater through the unit. 2 Make connection between the Bluetooth wireless technology device and the unit. • See Pairing Bluetooth® adapter and Bluetooth wireless technology device above. 1 Press FUNCTION / or AIR JAM on the front panel of the unit to select AIR JAM as the input source. € When Bluetooth® adapter AS-BT200 is connected, is shown on the front panel display for 2 seconds, then is shown. € When no Bluetooth® adapter is connected, is shown on the front panel display for 2 seconds, then is shown. The following operations are now possible for Bluetooth wireless technology devices, using the remote control. * * This function may work differently depending on the connected device. Tip • When no Bluetooth wireless technology device is connected and no operation has been done for 30 minutes or more, the power will automatically turn off. note 1 • The Bluetooth wireless technology enabled device must support AVRCP profile. € The operation of some Bluetooth wireless technology devices may differ from what is shown the above table. [. . . ] , water droplets (condensation) may form inside (on operating parts and the lens). When condensation is present, this unit will not operate properly and playback is not possible. Let this unit stand at room temperature for 1 or 2 hours with the power turned on (the time depends on the extent of condensation). Condensation can also occur in the summer if this unit is directly exposed to the air flow from an air-conditioner. [. . . ]