User manual PIONEER X-SMC1-K

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side). Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. [. . . ] 2 For more details, see also the operating instructions of your Bluetooth wireless technology device. Each time SET UP is pressed the item on the front panel display changes accordingly. 1 Press FUNCTION / or BT AUDIO on the front panel of the unit to select BT AUDIO as the input source. When Bluetooth® adapter AS-BT200 is connected, is shown on the front panel display for 2 seconds, then is shown. ⷠWhen no Bluetooth® adapter is connected, is shown on the front panel display for 2 seconds, then is shown. Each time / is pressed the item on the front panel You can select the PIN number from 0000/1234/8888. 2 Turn on the Bluetooth wireless technology device that you want to pair, place it near the system and set it into pairing mode. If the Bluetooth wireless technology device cannot be connected to the unit, perform the connection operation from the Bluetooth wireless technology device. Pairing is required when you first use Bluetooth wireless technology device and Bluetooth® adapter. ⷠTo enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device. 1 Press FUNCTION / or BT AUDIO on the front panel of the unit to select BT AUDIO as the input source. Air Jam lets you connect multi compatible devices to this unit using Bluetooth wireless technology. With it, you can make a group playlist directly on a supported device to play in your home theater through the unit. 1 Press FUNCTION / or AIR JAM on the front panel of the unit to select AIR JAM as the input source. When Bluetooth® adapter AS-BT200 is connected, is shown on the front panel display for 2 seconds, then is shown. ⷠWhen no Bluetooth® adapter is connected, is shown on the front panel display for 2 seconds, then is shown. The following operations are now possible for Bluetooth wireless technology devices, using the remote control. When no Bluetooth wireless technology device is connected and no operation has been done for 30 minutes or more, the power will automatically turn off. The operation of some Bluetooth wireless technology devices may differ from what is shown the above table. This unit may not recognize a USB storage device, play files or supply power to a USB storage device. Pioneer does not guarantee that any file recorded on a USB storage device will play or that power will be supplied to a USB storage device. Also note that Pioneer will accept no responsibility whatsoever for loss of files on USB storage devices caused by connection to this unit. [. . . ] ⷠDepending on signal conditions, striped patterns may appear on a TV screen and noise may enter the sound of radio broadcasts when the unit's power is on. If this unit is moved suddenly from a cold place into a warm room (in winter, for example) or if the temperature in the room in which this unit is installed rises suddenly due to heater operation, etc. , water droplets (condensation) may form inside (on operating parts and the lens). When condensation is present, this unit will not operate properly and playback is not possible. [. . . ]