User manual PIONEER TX-9800

[. . . ] This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC/IC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) exposure rules. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] # Bluetooth devices that are difficult to establish connection is called special device. If your Bluetooth device is listed in the special device, select the appropriate one. # If five devices are already paired, MEMORY FULL is displayed and it is not possible to perform the pairing operation. # Push MULTI-CONTROL left or right to display the device name, BD address and PIN code of this unit. 5 Push MULTI-CONTROL up or down to select a device name you want to connect. This function can be operated only when the Bluetooth wireless connection is being established. 4 When the device name is being displayed, push MULTI-CONTROL right to display DELETE YES. You can choose a Bluetooth service from PHONE service, AVRCP service or A2DP service. # Push MULTI-CONTROL left or right to switch the BD address and device name. # If multiple Bluetooth devices have been connected and you wish to disconnect them, press MULTI-CONTROL and then select the device. # Profile that is not compatible with the connected device cannot be selected. This entails establishing a Bluetooth wireless connection between this unit and your Bluetooth audio player, and pairing your Bluetooth audio player with this unit. % Connecting and pairing For detailed instructions on connecting your phone to this unit via Bluetooth wireless technology, see following section. If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. Playing songs on a Bluetooth audio player % Selecting a track Push MULTI-CONTROL left or right. Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage. Advanced operations that require your attention such as dialing numbers on the monitor, using phone book, etc. When you need to use these advanced operations, stop your vehicle in a safe place. Depending on the cellular phone connected to this unit, the operations available with this unit may be limited. Lular phone remains muted even after the cellular phone is disconnected. Making a phone call dial a number The most basic way to make a call is to simply dial the number. For detailed instructions, refer to Making a call by entering phone number on page 36. [. . . ] Depending on the USB devices connected to this unit, it may generate noise in the radio. There may be a slight delay when starting playback of audio files on a USB portable audio player/USB memory with numerous folder hierarchies. Do not connect anything other than the USB portable audio player/USB memory. Operations may vary depending on the kind of USB audio player and a USB memory. [. . . ]