User manual PIONEER TX-6500II service manual

[. . . ] Always keep the volume low enough so that you can hear sounds from outside the vehicle. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station. The Windows MediaTM logo printed on the box indicates that this unit can play back WMA data. [. . . ] For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 28. Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 22). If you change this setting, subwoofer output in the audio menu return to the factory settings. Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting. To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. With some Bluetooth audio players, you may be required to enter the Bluetooth audio player PIN code in advance to set this unit for a connection. You need to activate the BT AUDIO source in order to use a Bluetooth audio player. Should this unit connecting Bluetooth adapter fails to operate properly and you consult your dealer for repair, you may be asked to indicate the system version and Bluetooth module version of the adapter. Up to two auxiliary devices such as VCR or portable devices (sold separately) can be connected to this unit. When connected, auxiliary devices are automatically read as AUX sources and assigned to AUX1 or AUX2. 1 After you have selected AUX as the source, use MULTI-CONTROL and select FUNCTION to display TITLE INPUT. If you try operating your cellular phone, the signal from your cellular phone may cause noise on the song playback. When you are talking on a cellular phone connected to this unit via Bluetooth wireless technology, song playback from your Bluetooth audio player connected to this unit is muted. Even if while you are listening to a song on your Bluetooth audio player and you switch to another source, playback of song continues. If you select another folder during repeat play, the repeat play range changes to ALL. If you perform track search or fast forward/reverse during TRACK, the repeat play range changes to FOLDER. When FOLDER is selected, it is not possible to play back a subfolder of that folder. After file or folder scanning is finished, normal playback of the files begins again. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. CDBTB100) to this unit, you can control Bluetooth audio players via Bluetooth wireless technology. Depending on the Bluetooth audio player connected to this unit, the operations available with this unit are limited to the following two levels: -- Lower level: Only playing back songs on your audio player is possible. Since there are a number of Bluetooth audio players available on the market, operations with your Bluetooth audio player using this unit vary in great range. [. . . ] Switch the ignition key, or switch to a different source, then back to the CD player. Does not contain any files that can be played back The inserted disc Replace disc. In some cases, a Dual Disc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using Dual Disc with this unit. [. . . ]