User manual PIONEER SX-550 schematic

[. . . ] To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. g. , 230V D3-4-2-1-4_A_En or 120V) written on the rear panel. Operating Environment Operating environment temperature and humidity: +5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c_A_En WARNING To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the D3-4-2-1-7a_A_En equipment. This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and D3-4-2-1-9a_En 93/68/EEC). CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. [. . . ] When you're ready to resume watching, just press the Play button. To use this feature the recorder must be connected to your TV using a SCART cable, and the AV Link setting (page 134) should be set to This Recorder Only. Check the instructions that came with your TV if you're not sure. Important · Pause Live TV will not work as expected when watching TV via an external component such as a VCR or digital tuner. 1 PAUSE LIVE TV Using the timer recording features you can program up to 32 timer recordings up to a month in advance. Timer recording programs can be set to record just once, every day, or every week. There are two ways to program a timer recording; using the GUIDE Plus+ system (see The Schedule Area on page 68) or using the Easy Timer Recording feature (see Easy Timer Recording below). You can set the recording quality for your timer recording in the same way as for a regular recording, but with the added option of an AUTO mode, which maximizes the recording quality for the space available on the disc (if recording to DVD), or to fit on to a blank DVD disc (if recording to HDD). You can set timer recordings to record to a recordable DVD or to the hard disk drive. For regular (daily or weekly) HDD timer recordings that you don't need to keep, you can use the Auto Replace Recording feature to automatically replace the previous timer recording with the new one. Note that when you use this feature, the previous recording made on that timer program will be replaced by the next one, regardless of whether you have watched it yet or not. The lighter area is time that's available. Note 1. You can't use VPS/PDC with Easy Timer Recording. Set a scheduled recording using the GUIDE Plus+ system if you want to use VPS/PDC. 80 En Recording 06 6 ENTER Set the start time. · You can go back and reset the start time if you need to by pressing RETURN. Stopping a timer recording English STOP REC 1 Press during a timer recording. ENTER 2 ENTER Select `Yes' to confirm. 7 Move the cursor to the recording end time on the grid. Recording start time Recording end time Easy Timer Recording 11:00 1/01 2/01 3/01 SAT 12:00 13:00 14:00 15:00 16:00 17:00 Preventing use of the recorder before a timer recording (child lock) You can make all the front panel and remote control buttons inoperative using the child lock feature. This is useful when you set a timer recording and want to make sure that the timer settings are not changed before recording has finished. RECORDER 1/01 Pr 7 11:45 ­ 13:45 REC MODE SP HDD/DVD HDD 1 If the recorder is on, switch it into standby. As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. 8 ENTER 2 [Front panel] Press and hold for three seconds to lock the controls. If any buttons are pressed on the remote or front panel, LOCK is briefly displayed again. · To unlock the recorder, press and hold STOP on the front panel (while the recorder is stopped) for three seconds until the display shows UNLOCK. Set the end time. ENTER 9 Select `Yes' to set the timer recording and exit, or `No' to go back to the Easy Timer Recording screen. · You can check the timer recording details you just set from the Schedule Area in the GUIDE Plus system; see The Schedule Area on page 68. Extending a timer recording in progress You can extend a timer recording beyond the programmed end time. This can be useful if a broadcast program overruns, for example. Canceling or extending the timer REC ì Press and hold for three seconds during a 1 timer recording. Recording continues, but the timer indicator disappears from the front panel display indicating that the timer has been canceled. REC ì Press repeatedly to extend recording in 30 2 minute blocks. 81 En 06 Recording PLAY Timer recording FAQ Frequently Asked Questions · Even though the timer is set, the recorder doesn't start recording!Check that the disc loaded or HDD is recordable, not locked (see Lock Disc on page 123), and that there are fewer than 99/999 titles already on the DVD/HDD. [. . . ] Use in a dusty or damp environment or in a room where it will be exposed to excessive cigarette smoke. 147 En 16 Additional information Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interference--especially if the television uses an indoor antenna. Use in a kitchen or other room where the recorder may be exposed to smoke or steam. Use on a thick rug or carpet, or cover with cloth--this may prevent proper cooling of the unit. [. . . ]