User manual PIONEER SX-20-S

[. . . ] The RDS (radio data system) function only operates in areas with broadcasting RDS signals for FM stations. Head unit 1 2 34 5 6 1 Indicator (list) Sub information section TA (traffic announcements) TP (traffic program identification) (sound retriever) LOC (repeat) (random) State The list function is being operated. 2 7 8 CAUTION This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007. If you want to dispose this product, do not mix it with general household waste. [. . . ] Operations using special buttons Selecting a repeat play range to cycle between the following: 1 Press 6/ !FLD – Repeat the current folder Playing tracks in random order to turn random play on or off. 1 Press 5/ Tracks in a selected repeat range are played in random order. To change songs during random play, press d to switch to the next track. Pressing c restarts playback of the current track from the beginning of the song. CD/CD-R/CD-RW Basic operations Playing a CD/CD-R/CD-RW 1 Insert the disc into the disc loading slot with the label side up. En 5 Section 02 Operating this unit Operating this unit !W CTRL and HPF SETTING are not available when REAR/REAR is selected in SP-P/O MODE. For details, refer to SP-P/O MODE (rear output and preout setting) on the next page. POWERFUL—NATURAL—VOCAL—CUSTOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected. To cycle between the following: Equalizer band—Equalizer level 5 Turn M. € Disconnect the negative terminal of the battery before installation. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. € Place all cables away from moving parts, such as the shift lever and seat rails. € Place all cables away from hot places, such as near the heater outlet. € Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. € Never cut the insulation of the power cable of this unit in order to share the power with other devices. When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle’s auto-antenna relay control terminal (max. If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect the blue/white cable to the power terminal of an external power amp. Ground cables for this unit and other equipment (especially, high-current products such as power amps) must be wired separately. [. . . ] 1 kHz, 48 kHz English Windows Media Audio Professional, Lossless, Voice/DRM Stream/Stream with video: Not compatible Do not insert anything other than a CD into the CD loading slot. Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player. Do not attach labels, write on or apply chemicals to the surface of the discs. To clean a CD, wipe the disc with a soft cloth outward from the center. [. . . ]