User manual PIONEER SG-9500

[. . . ] Also, damage to this unit, smoke, and overheating could result from contact with liquids. "CLASS 1 LASER PRODUCT" This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. If the battery is disconnected or discharged, any preset memory will be erased. [. . . ] Operating this unit's iPod function from your iPod This function is not compatible with the following iPod models. IPod 5th generation This unit's iPod function allows you to conduct operations from your iPod and listen to it using your car's speakers. IPOD ­ This unit's iPod function can be operated from the connected iPod. AUDIO ­ This unit's iPod function can be operated from this unit. Enhancing compressed audio and restoring rich sound (sound retriever) Refer to Enhancing compressed audio and restoring rich sound (sound retriever) on the previous page. Note Incompatible text saved on the iPod will not be displayed by the unit. Playing a song in the selected category 1 When a category is selected, press and hold M. Note Depending on the number of files in the iPod, there may be a delay when displaying a list. After selecting, perform the following procedures to set the function. Operation is complete even if the menu is cancelled before being confirmed. The following functions are still accessible from the unit even if the control mode is set to IPOD. -- Place all cables away from moving parts, such as the gear shift and seat rails. -- Place all cables away from hot places, such as near the heater outlet. -- Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. -- Never cut the insulation of the power cable of this unit in order to share the power with other devices. When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle's auto-antenna relay control terminal (max. If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect the blue/white cable to the power terminal of an external power amp. Use speakers over 50 W (output value) and between 4 W to 8 W (impedance value). When installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car's body. [. . . ] In some cases, a DualDisc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using DualDisc with this unit. Please refer to the information from the disc manufacturer for more detailed information about DualDiscs. Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. [. . . ]