User manual PIONEER SE-CL541

[. . . ] Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method K015 En of connecting and operating the unit is the same. [. . . ] The PLAY/PAUSE button’s indicator and [CUE] indicator will flash, and play will be paused. When the PLAY/PAUSE button is pressed again, play will resume and the button indicator will light steadily. In the CDJ mode broken sound will still be audible during the standby mode; if you wish to stop all sound, lower the output sound volume on your audio mixer. When the unit has not been operated for 80 minutes or more in pause mode, the disc rotation stops automatically. In this instance, playback can be resumed by pressing the PLAY/PAUSE button. Track Cueing 7 TRACK SEARCH buttons (4, ¢) Press one of the TRACK SEARCH buttons (4, ¢). Each time the button is pressed, the track is cued in the direction corresponding to the arrow on the button (during playback of one track, to cue playback to the beginning of the preceding track, press the 4 button twice). If the button is held for two seconds or more, the cue speed increases. Pressing the 4 button twice at the beginning of the first track, will cause the unit to cue to the very last track. When the end of the disc's last track is reached, pressing the ¢ button will cue to the first track (track 1). Rotate the Jog dial while pressing one of the TRACK SEARCH buttons (4, ¢). In the VINYL mode, to set the Cue point, go through steps 2 and 3 as mentioned above. 7 Real-time cue ÷ The SEARCH buttons (1, ¡) can now be used to modify the cue point, in the same way as for the CDJ mode. During playback, press the LOOP IN/REALTIME CUE button at the desired Cue point. ¶ The sound at the specified Cue point will continue to play as long as the CUE button is pressed. ) ¶ Playback will begin immediately from the specified Cue point. Slide the knob towards you (+) to increase the tempo and slide it away from you (–) to decrease it. ¶ The rate of change in playback speed (tempo) is shown in the display. ¶ The playback speed can be changed without changing the pitch ( “Applying Master Tempo”). Each time the button is pressed the variable range of the Tempo Control knob changes as follows: ±6%, ±10%, ±16% and ±100%. The Tempo Reset indicator lights and the rate of tempo variation is reset to [0] (normal tempo) regardless of Tempo Control knob setting. ¶ One more press of the TEMPO RESET button cancels the reset and speed setting made with the Tempo Control knob is valid again. [. . . ] ¶ Hold down the TIME MODE/AUTO CUE button for 1 second or longer to turn off the A. ¶ Check the settings of the audio mixer switches and sound volume controls. ¶ Switch OFF TV set, move player away from TV set or plug the player into a separate outlet. ¶ Press TIME MODE/AUTO CUE button for more than 1 second to set the auto cue function OFF. [. . . ]