User manual PIONEER SA-9800

[. . . ] To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the D3-4-2-1-7b_A_En equipment on thick carpet or a bed. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. [. . . ] You can also use tracks on a USB device as source material for a backing track. To avoid unpleasant feedback, make sure you don't point the microphone(s) at the speakers. Adding some effects to the microphone mix can sometimes improve the overall sound. You may want to lower or raise the pitch of the backing track to match your vocal range. 4 · Press SHIFT+ or SHIFT+ to lower or raise the pitch of the backing track. Press SHIFT+KARAOKE to turn KARAOKE mode on or off for discs that have vocals on both Left and Right channels: KARAOKE (Vocal Fade) ­ Vocals in the backing track are partially eliminated. If you try to use SHIFT+KARAOKE, SHIFT+ECHO, SHIFT+, or SHIFT+ when no mic is connected, a NO MIC error message is displayed. Also note that during DVD playback, when you connect a mic sound settings are automatically switched to STEREO playback and the player downmixes multichannel sources to 2. These features are only available with the DVD/CD or USB input functions. 2 Depending on the microphone level, the sound of the disc may distort. 3 You cannot adjust SFC modes, tone controls (bass, treble, and bass boost), Extra Power mode, Front Surround mode, MP3 Expander mode or Voice Enhancer mode when a microphone is plugged in. What it means What it means Specify the distance of your speakers from your listening position (see Speaker Distance on page 33). Default level: Off; Default password: none; Default Country/Area code: us (2119) To give you some control over what your children watch on your DVD player, some DVDVideo discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc won't play. The player does not play certain scenes on these discs, depending on the Country/Area Code you set. 2 Use the number buttons to input a fourdigit password then press ENTER. To change your password, confirm your existing password then enter a new one. 1 Select `Password Change', input your existing password, then press ENTER. Register a password to change the Parental Lock level or enter a Country/Area code. Not all discs use Parental Lock, and will play without requiring the password. If you forget your password, you'll need to reset the player to register a new password (see Resetting the system on page 47). If you load a disc that contains DivX VOD content not authorized for your player, the message Authorization Error is displayed and the content will not play. [. . . ] Make sure the file permission hasn't been restricted (through a password, etc. Make sure that you've selected this player as the HDMI input in the settings for the component you're using (refer to the component's instruction manual). Check that components connected using the HDMI interface are switched on and HDMI compatible (Components must be compatible with both DVI and High Bandwidth Digital Content Protection (HDCP)). Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers. [. . . ]