User manual PIONEER SA-6800 service manual

[. . . ] If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. if connected to an AC outlet , the cut-off plug can cause severe electrical shock. The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when D3-4-2-2-1a_A_En on vacation). [. . . ] Operation of the video cross fader and [TRANS] button are not supported in the video solo mode. Video cross fader No Name 1 2 3 4 5 6 FADE WIPE SWITCH CHROMA-B CHROMA-G LUMINANCE Description of the effect Switches video while mixing. Switches from the blue component of video on cross fader side [A] to the video on side [B]. Switches from the green component of video on cross fader side [A] to the video on side [B]. Switches from the dark portion of video on cross fader side [A] to the video on side [B]. This function applies effects to the selected channel's sound and video. Effects include BEAT effects, which are applied in linkage to the track's BPM; TOUCH effects, which control effects by directly touching the screen; and TEXT effects, which display onscreen characters with effects added in rhythm to the track. The UTILITY (MASTER MONITOR) button can be pressed to display the master monitor's image on the LCD screen. When BEAT effect is enabled, you can choose from [ORIGINAL]/[INVERSE]/[EDGE]/[HUE]. Touch to switch the measurement method of the BPM between AUTO and TAP. BEAT effects can be instantaneously set in-sync with the BPM (Beat Per Minute) of the track, enabling you to apply various effects to the rhythm even during live performances. Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF). When [HOLD] button is set to [ON], effects are recorded from the time the screen is touched until the finger is removed (max. Each time the [HOLD] button is touched it will switch between [ON] and [OFF]. This function allows the use of images produced internally by the unit. In the event no input image is present, the visualizer's image can be used. Touch to switch the measurement method of the BPM between AUTO and TAP. Touch to select the multiplication factor of the beat calculated from the BPM for synchronization of effects. TEXT effects can be instantaneously set in-sync with the BPM (Beat Per Minute) of the track, enabling you to apply various TEXT effects to the rhythm. When master monitor is off Select and touch the desired effect button from the 6 TEXT effects. When a BPM cannot be measured automatically, the BPM display in the display will flash. The [TEXT] button will light brightly, and the icon will move as an animation. [. . . ] 1 Connect the USB MIDI output connector of the SA-6800 to your computer using the USB cable. PARAMETER 1 value; FLANGER, PHASER, FILTER, CHORUS changed to 1/2 value; minus values of ROBOT are converted to positive. By connecting a keyboard to the USB connector, text can be entered through the keyboard during text edit mode (P. Touch each applicable button on the screen to perform keyboard language setup. [. . . ]