User manual PIONEER RG-2

[. . . ] The Windows MediaTM logo printed on the box indicates that this unit can play back WMA data. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. This unit may not operate correctly depending on the application used to encode WMA files. About MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i. [. . . ] 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. Once stored you can tune in to those frequencies with the touch of button. Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6. % When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. memorized radio station frequency can be recalled by pressing the preset tuning button. # Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. The six strongest broadcast frequencies are stored in the order of their signal strength. Repeat play plays the same track/folder within the selected repeat play range. # You cannot select a folder that does not have a compressed audio file recorded in it. However, if folder 01 (ROOT) contains no files, playback commences with folder 02. Depending on the version of iTunes used to write MP3 files onto a disc, comment information may not be correctly displayed. There are six stored equalizer settings such as DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be recalled at any time. When FLAT is selected no supplement or correction is made to the sound. Press EQ repeatedly to switch between the following equalizers: DYNAMIC--VOCAL--NATURAL--CUSTOM --FLAT--POWERFUL SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. The AM volume level can also be adjusted with source level adjustments. 1 Compare the FM volume level with the level of the source you wish to adjust. Turning the clock display on or off You can turn the clock display on or off. Even when the sources are off, the clock display appears on the display. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. Press FUNCTION repeatedly to switch between the following settings: Clock--FM (FM tuning step)--AM (AM tuning step)--AUX (auxiliary input) Use the following instructions to operate each particular setting. [. . . ] Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions, and so on. Only 32 characters from beginning can be displayed as a file name (including the file extension) or a folder name. Regardless of the length of blank section between the songs of original recording, compressed audio discs play with a short pause between songs. Since the CD side of Dual Discs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this unit. [. . . ]