User manual PIONEER PL-X11Z

[. . . ] -- Never cut the insulation of the power cable of this unit in order to share the power to other equipment. Control signal is output through blue/white cable when this unit is powered on. If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect blue/white cable to external power amp's power terminal. [. . . ] Never connect blue/white cable to external power amp's power terminal. This cable and other product's ground cable (especially, high-current products such as power amp) must be wired separately. Otherwise, fire or malfunction may result if they are accidentally detached. ISO connector Note In some vehicles, the ISO connector may be divided into two. Note When using a subwoofer of 70 W (2 ), be sure to connect with Violet and Violet/black leads of this unit. Speaker leads White: White/black: Gray: Gray/black: Green: Green/black: Violet: Violet/black: Front left Front left Front right Front right Rear left or subwoofer Rear left or subwoofer Rear right or subwoofer Rear right or subwoofer When connecting to separately sold power amp In another type of vehicle, never connect 6* and 7*. Power amp (sold separately) To rear output Power amp (sold separately) Power amp (sold separately) Connect with RCA cables (sold separately) Perform these connections when using the optional amplifier. Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. Do not install this unit where: -- it may interfere with operation of the vehicle. Install this unit away from hot places such as near the heater outlet. Installation of this unit should be entrusted to a dealer from whom you purchased this unit. If other parts are used, this unit may be damaged or could dismount itself, which leads to an accident or trouble. Do not install this unit near the doors where rainwater is likely to be spilled on the unit. Fix this unit securely to the steering wheel with the belt attached to the unit. If this unit is loose, it disturbs driving stability, which may result in a traffic accident. Do not attach this unit to the outer circumference of the steering wheel. Always attach this unit to the inner circumference of the steering wheel as shown. Use separately sold clamps to secure the lead where necessary inside the vehicle. Do not install this unit in such a place as may obstruct the driver's view. Since interior layout differs depending on the type of vehicle, the ideal installation location for the unit also differs. [. . . ] Do not install this unit in such a place as may obstruct the driver's view. Since interior layout differs depending on the type of vehicle, the ideal installation location for the unit also differs. When installing the unit, select a location that assures optimum transmission of signals from the unit to the car stereo. When the unit is installed on a right-hand-drive car, the horizontal positions are inverted. [. . . ]