User manual PIONEER PL-7

[. . . ] · Do not perform other operations during firmware update. Firmware Update Startup (SDHC card / USB memory) Updating will begin when firmware stored on a SDHC card or USB memory is detected. [. . . ] <Copy to> SDHC card: Copy in [system] folder USB memory: Copy in root directory Notes · Do not use any application while downloading the file. PL-7 must be in standby (power-off) mode when the SDHC card or USB memory is inserted. If firmware is stored on a SDHC card or USB memory that is recognized by the player, the firmware update will automatically begin. During the update, the LCD front panel display on the player shows "UPDATE SD XX. XX" or "UPDATE USB XX. XX. " Firmware version is displayed as "XX. XX . " The firmware update will be completed in approx. HD PILOT waits for application of firmware to be completed on the PL-7. Once HD PILOT confirms that application of firmware has been successfully completed, the following message appears: This version number is only an example. HD PILOT and the PL-7 are now connected, and the online functions of HD PILOT can be used. NOTE: Do not turn off the PL-7's power during the process. NOTE: Before executing, insert an SDHC card with at least 40 MB of free space into the PL-7. [. . . ] NOTE: The screens shown above are from the development stage: the actual firmware file names and version indications will differ. [. . . ]