Detailed instructions for use are in the User's Guide.
[. . . ] PORTABLE DVD PLAYER
PDV-LC10
(with liquid crystal display)
PDV-10
Operating Instructions
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT
FOR USE IN THE UNITED KINGDOM
The wires in this mains lead are coloured in accordance with the following code : blue neutral brown live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted. The cut-off plug should be disposed of and must not be inserted into any 13 amp socket as this can result in electric shock. [. . . ] When the disc is removed or the STOP button is pressed again, the resume function is canceled and " " turns off.
¢ 3 8 ¡ E 7
Remote control unit
Previous button
4 1 e
STOP
Hint: · For some discs, playback may not start from the position at which it was stopped. · If the STOP button then the previous button is pressed while the resume function is on, playback starts from the beginning of the title.
BASIC OPERATION
Pausing the disc
Main unit
Press the play/pause button.
The following message appears on the Play/pause display window: button
Remote control unit
PAUSE
1 e 3 8 ¡ E 7
· Press the button again to resume playback.
52
En
Playback Functions
Scanning forward and backward
Operation from the main unit
English
1 During playback, press and
Main unit
hold in the previous or next button.
1 2
4 : Reverse direction ¢ : Forward direction "Scan" flashes.
2 Release the button while scan
is flashing.
Playback resumes from that point.
Hold scan Scanning is held when the previous or next button is pressed in until "Scan" stops flashing, remaining lit. Press the play/pause button once the desired position is reached.
BASIC OPERATION
Remote control unit
Operation from the remote control unit
1 Press and hold in one of the
scan buttons during playback.
1 : Reverse direction ¡ : Forward direction "Scan" flashes.
4
¢ 3 8 ¡ E 7
Scan buttons
1
PLAY
e
2 Release the button while scan
is flashing.
Hold scan Scanning is held when the scan button is pressed in until "Scan" stops flashing, and remains lit. Press the PLAY button once the desired position is reached.
53
En
Playback Functions
Returning to the previous chapter or track - DVDs, video CDs and CDs
Main unit
Previous button
Press the previous button during playback.
· When pressed once, playback returns to the beginning of the currently playing chapter or track. · When pressed again, playback returns to the beginning of the previous chapter or track.
Remote control unit
Previous button
4 1 3
¢ ¡
BASIC OPERATION
Moving ahead to the next chapter or track - DVDs, video CDs and CDs
Main unit
Next button
Press the next button during playback.
When pressed once, playback moves forward to the next chapter or track.
Remote control unit
Next button
54
En
4
¢
Playback Functions
Removing discs
Main unit
English
1 Press the STOP button.
The following message appears on the display window:
1
Remote control unit
1 e 3 8 ¡ E 7
1
2
OPEN #
2 Slide the OPEN switch to the
BASIC OPERATION
# side and open the lid.
The following message appears on the display window:
3
¿Ç
PO RT AB LE
Û
N
DV D
3 Remove the disc.
Note: With CDs or one-sided DVDs, you do not have to worry about touching the label (printed) side of the disc with your fingers. Two-sided DVDs, however, have signals recorded on both sides, so be careful not to scratch them when removing them from the player.
, ?¿Ç N Û
PO RT AB LE
4
PL AY ER
, ?
DV D
PL
AY
ER
4 Press PUSH CLOSE to close
the lid.
55
En
Turning Off the Power
Main unit
1
1 When the power is on, slide
the power switch to the left side and hold it there for at least 1 second.
HOLD
ON/OFF
Power indicator
· The power indicator switches from green to red and the standby mode is set. · The power can also be turned off by pressing the power button on the remote control unit.
Remote control unit
1
BASIC OPERATION
4
¢
2 Unplug the power cord from
the power outlet.
3 Disconnect the AC adapter
DC IN 9V
3
from the player's DC input jack.
4 Disconnect the power cord
from the included AC adapter.
4
2
Note: When using the battery pack (PDV-BT10), the power indicator turns off when the power is turned off. This is to prevent wear of the battery.
56
En
Setup Screen Operations
With this player, various functions recorded on DVDs can be set in addition to the settings made with the Setup Navigator. English
Starting up the setup screen
By changing the setting items on the various menus on the setup screen you can create a more convenient playback environment. Main unit
Press the SETUP button.
The setup screen appears.
Audio1 2 Video Language General Other Dolby Digital Out Dolby Digital DTS Out Off 96kHz PCM Out 96kHz 3 48kHz MPEG Out MPEG 3 PCM
SETUP
i Setup audio Digital output format/tone adjust Move
SETUP
Exit
Remote control unit
· The setup screen is displayed whenever the SETUP button is pressed, regardless of the player's play mode (play or stop) or the type of disc (DVD, video CD or CD). SETUP
ADVANCED OPERATIONS
4 1 e 3 8
¢ ¡ E 7
Hint: · When the Setup Navigator is started up, the on-screen information is displayed regardless of whether the "Basic" or "Expert" setup screen mode is selected. · If the Setup Navigator has appeared automatically, select "Not Used" then press the ENTER button, or press the return button. The setup screen appears.
57
En
Setup Screen Operations
Names of parts on the setup screen
The setup screen consists of six tabs (Audio 1, Audio 2, Video, Language, General and Other), the on-screen information and the operating guide.
1 2
Audio1 2 Video Language General Other Dolby Digital Out Dolby Digital DTS Out Off 96kHz PCM Out 96kHz 3 48kHz MPEG Out MPEG 3 PCM i Setup audio Digital output format/tone adjust SETUP Exit Move
3
4
5
1 Tabs The first step to making the settings is to select one of the six tabs (Audio 1, Audio 2, Video, Language, General or Other). Select the desired setting item from the tabs to display the various settings. 2 Setting items The setting items for the selected tag are displayed here. 3 Current settings/choices The current settings of the different modes or the choices for the setting items are displayed here. 4 On-screen information Information on the item specified with the cursor is displayed here. The " i " mark indicates information.
5 Operating guide A list of the buttons that can be used is displayed here to help you when operating the buttons. If there is more than one button that can be used for the same operation, only one of the buttons is displayed.
Hint: When the cursor is set to a tag, a list of the current settings is displayed. After checking that screen, select the mode for which you want to make changes from among the tags. (Page 60) Note: When the cursor is set to "Other" or when the "Expert" setup screen is selected, the on-screen information is not displayed, regardless of the setting item.
ADVANCED OPERATIONS
58
En
Setup Screen Operations
Items that can be set and items that cannot be set depending on the type of disc
The setup screen includes items that can be set and items that cannot be set depending on the type of disc (DVD, video CD or CD). [. . . ] If the pictures from all the cameras were broadcast simultaneously and you could choose the viewpoint (camera), you could see what you want. Some DVDs include the images filmed by all the different cameras, and these can be selected using this player.
1
The player's digital output jack must be connected to the digital input jack on a Dolby Digital compatible amplifier or decoder in order to enjoy Dolby Digital sound. ADDITIONAL INFORMATION
DTS
DTS stands for Digital Theater Systems. DTS is a surround system different from Dolby Digital.
126
En
The player's digital output jack must be connected to the digital input jack on a DTS compatible amplifier or decoder in order to enjoy DTS sound.
Terms
Multiple Language
The Multiple Language feature refers to the actual audio language that you hear while enjoying DVD playback. [. . . ]