User manual PIONEER PDP-506 PE & PDP-506FDE,MV

[. . . ] Book Page 1 Friday, June 17, 2005 3:08 PM PLASMA DISPLAY SYSTEM SYSTEME D’ÉCRAN PLASMA PLASMA DISPLAY-SYSTEM PDP-506XDE PDP-436XDE Discover the benefits of registering your product online at www. Book Page 3 Friday, June 17, 2005 3:08 PM English WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A_En The following symbols are found on labels attached to the product. [. . . ] Installation Aerial Power Country Add New Channels Replace Existing Channels Signal Check Restore System Defaults Off Germany NOTE • To complete “Replace Existing Channels”, there must be more than 1 hour at least left to the next preset recording or preset Auto Update time. € The password entry screen does not appear if you have disabled the password function. For details, see “Using a password (AV mode only)” on page 58. € You can select “DTV Setup” only when watching DTV channels. Adding new channels Use the following procedure to search and register new channels with the current DTV channel setups saved. NOTE • The password entry screen does not appear if you have disabled the password function. For details, see “Using a password (AV mode only)” on page 58. € You can select “DTV Setup” only when watching DTV channels. Installation Aerial Power Country Add New Channels Replace Existing Channels Signal Check Restore System Defaults Off Germany Replacing the existing channels The following procedure discards the current DTV channel setups and searches for receivable channels to redo the channel setups. If any new channel is found, it is automatically registered on the Media Receiver. Found Channels 04 20 30% 001 ************ 002 ************ 003 ****** 004 ************ Installation Aerial Power Country Add New Channels Replace Existing Channels Signal Check Off Germany 09 Add New Channels Search Information Existing Channels New Channels Found Progress English • To quit a channel search in progress, press HOME MENU. Restore System Defaults NOTE • The password entry screen does not appear if you have disabled the password function. For details, see “Using a password (AV mode only)” on page 58. € You can select “DTV Setup” only when watching DTV channels. NOTE • You can select “DTV Setup” only when watching DTV channels. Restoring the system defaults Checking signal strength You can check the signal strength and signal quality of each TV channel. Use this function only when you wish to reset all the DTV settings to the factory defaults. Select the channel to be checked ( / Signal Check RF Channel Add New Channels Signal Strength : 0 25 77% 50 : 100% Good Select “Installation” ( / then ENTER). 6 With “OK” pressed, the system restores the factory defaults. 75 100 NOTE • The password entry screen does not appear if you have disabled the password function. For details, see “Using a password (AV mode only)” on page 58. € You can select “DTV Setup” only when watching DTV channels. [. . . ] € Check if the input source for video or PC has been unintentionally selected although you want to watch a TV channel. ) • Check if you have selected a channel blocked with Child Lock. ) • Check if you have selected “Picture Off” for Energy Save. With this option selected, the screen is deactivated: only sound is output. [. . . ]