Detailed instructions for use are in the User's Guide.
[. . . ] 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Note to CATV system installer. [. . . ] 2 Press / to select "DTV Setup", and then
press ENTER.
3 Press / to select "DTV Channel Setup",
and then press ENTER.
4 Press / to select "Auto Channel Preset",
and then press ENTER.
· Channel search automatically starts.
7 Press HOME MENU to exit the menu.
· With "Cable" selected, this system can receive only digital TV signals with the 8VSB modulation. This system does not support the QAM modulation.
5 Press / to select "Air" or "Cable".
44
En
PDP5040HD-Eng (40-55)
44
7/24/03, 1:59 PM
Basic Adjustment Settings
Setting for skipping unwanted channels
From among digital TV channels searched and set up using Auto Channel Preset, you can select channels to be skipped when CH +/ are operated.
09
Checking signal strength
When watching a digital TV program, you can check its current signal strength.
English
1 Press HOME MENU. 2 Press / to select "DTV Setup", and then press
ENTER.
1 Press HOME MENU. 2 Press / to select "DTV Setup", and then press
ENTER.
3 Press / to select "DTV Channel Setup", and
then press ENTER.
3 Press / to select "DTV Channel Setup", and
then press ENTER.
4 Press / to select "Channel Add/Del", and then
press ENTER.
4 Press / to select "Signal Strength", and then
press ENTER.
5 Press / to select "Channel". 6 Press / to select a channel to be skipped.
· Adjust the direction of the antenna so that the current signal strength reaches as close to the maximum signal strength as possible.
7 Press / to select "Add/Delete". 8 Press / to select "Delete".
5 Press HOME MENU to exit the menu.
9 Press HOME MENU to exit the menu.
· To restore skipped channels, use the above procedure except that you select "Add" in step 8.
45
En
PDP5040HD-Eng (40-55)
45
7/24/03, 1:59 PM
09
Basic Adjustment Settings
Language setting
You can select a language to be used for on-screen display such as menus from among four languages; English, French, Spanish, and Korean.
Clock setting
Use the following procedure to set the time correctly. If you disconnect the power cord from the power outlet or power blackout occurs after setting the time, the set time is cleared. With "Auto" selected for Clock Setting, time information is then acquired and set automatically. With "Manual" selected, you then need to manually set the correct time again.
1 Press HOME MENU. 2 Press / to select "Setup", and then press
ENTER.
3 Press / to select "Language", and then press
ENTER.
4 Press / to select a language.
1 Press HOME MENU. 2 Press / to select "Setup", and then press
ENTER.
3 Press / to select "Clock", and then press
ENTER.
4 Press / to select "Clock Setting", and then
press / to select "Auto" or "Manual".
5 Press HOME MENU to exit the menu.
· If you select "Auto", the date and time will be automatically corrected.
5 Press / to select "Clock Set Channel", and then
press / to select a TV channel to be used for auto clock setting.
6 Press / to select "Time Zone", and then press
/ to select a time zone for your area.
7 Press / to select "D. S. T. ", and then press /
to select "On" or "Off" depending on whether summer time is employed in your area.
46
En
PDP5040HD-Eng (40-55)
46
7/24/03, 1:59 PM
Basic Adjustment Settings
8 Press / to select "Time & Date", and then press
ENTER. Activates the CTI.
6 Press HOME MENU to exit the menu.
6 Press HOME MENU to exit the menu.
51
En
PDP5040HD-Eng (40-55)
51
7/24/03, 1:59 PM
09
Basic Adjustment Settings
DRE
Use the DRE (Dynamic Range Expander) to adjust dark and bright portions on images so that the contrast between brightness and darkness becomes clearer.
Sound adjustments
Adjust the sound to your preference for the chosen AV Selection option. 2 Press / to select "Picture", and then press
ENTER.
1 Press HOME MENU. 2 Press / to select "Sound", and then press
ENTER.
3 Press / to select "Pro Adjust", and then press
ENTER.
3 Press / to select an item to be adjusted, and
then press / to select the desired level.
4 Press / to select "DRE", and then press
ENTER.
5 Press / to select the desired parameter, and
then press ENTER.
Item Treble Bass Balance Item Off On Description Deactivates the DRE. Activates the DRE.
button For weaker treble For weaker bass
button For stronger treble For stronger bass
Decreases audio from Decreases audio from the right speaker the left speaker
4 Press HOME MENU to exit the menu.
· To restore the factory defaults for all the items, press / to select "Reset" in step 3, and then press ENTER. Press / to select "Yes", and then press ENTER.
6 Press HOME MENU to exit the menu.
52
En
PDP5040HD-Eng (40-55)
52
7/24/03, 1:59 PM
Basic Adjustment Settings
FOCUS
This shifts the sound coming direction (sound images) upward and produces clear sound contours.
09
Front Surround
This provides three-dimensional sound effects and/or deep, rich bass.
English
1 Press HOME MENU. 2 Press / to select "Sound", and then press
ENTER.
1 Press HOME MENU. 2 Press / to select "Sound", and then press
ENTER.
3 Press / to select "FOCUS", and then press /
to select the desired parameter.
3 Press / to select "Front Surround", and then
press / to select the desired parameter.
Item Off (factory default) On
Description Deactivates the FOCUS. Activates the FOCUS.
Item Off SRS TruBass (factory default) TruBass + SRS
Description Deactivates both the SRS and TruBass. Provides both TruBass and SRS effects.
4 Press HOME MENU to exit the menu.
4 Press HOME MENU to exit the menu.
(WOW) designates a status where the FOCUS is on and TruBass + SRS has been selected for Front Surround. · WOW technology is incorporated under license from SRS Labs, Inc. ·
53
En
PDP5040HD-Eng (40-55)
53
7/24/03, 1:59 PM
09
Basic Adjustment Settings
Power Control
Power Control provides convenient functions for power saving.
No Signal off
The system will be automatically placed into the standby mode if no signal is received for 15 minutes.
Power Control for AV source
Energy Save
Power consumption is saved by decreasing picture brightness.
1 Press HOME MENU. [. . . ] (See page 30. ) · Check if you have activated the Parental Control function. (See page 90. ) Enter a password to temporarily cancel the Parental Control function. (See pages 16, 65 to 77 . ) · Is a non-compatible PC signal being input?(See pages 48 to 52. ) · Check if you have selected the minimum volume. [. . . ]