User manual PIONEER PD-S06 SERVICE MANUAL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PIONEER PD-S06. We hope that this PIONEER PD-S06 user guide will be useful to you.


PIONEER PD-S06 SERVICE MANUAL: Download the complete user guide (5280 Ko)

Manual abstract: user guide PIONEER PD-S06SERVICE MANUAL

Detailed instructions for use are in the User's Guide.

[. . . ] If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. if connected to an AC outlet , the cut-off plug can cause severe electrical shock. The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when D3-4-2-2-1a_A_En on vacation). [. . . ] (adjustable range: ­26 dB to +6 dB) 15 Channel level indicator Displays the current level for each channel, with two-second peak hold. 16 HEADPHONES CUE buttons/indicators These buttons are used to select from 1 to 4, MASTER, or EFFECTS, to allow you to monitor the desired source through headphones. If multiple buttons are pressed simultaneously, the selected audio sources are mixed. Unselected buttons glow darkly, while selected source buttons light brightly. 24 Master level indicator (MASTER L, R) These segment indicators display the output level from L and R channels. 26 Master output MONO/STEREO selector switch When set to the [MONO] position, master output, booth monitor output, recording output, digital output are all produced in L+R monaural. 27 BOOTH MONITOR LEVEL control dial This dial is used to adjust the booth monitor output volume. (adjustable range: ­ to 0 dB) 28 Headphones output switch (MONO SPLIT/STEREO) MONO SPLIT: When HEADPHONES CUE (1 , 2 , 3 , 4 or EFFECTS) button is selected , the selected audio is output to the L channel. When HEADPHONES CUE (MASTER) button is selected, the master audio is output from the R channel. sTEREO: The audio source selected with the HEADPHONES CUE button is output in stereo. 29 Headphones mixing dial (MIXING) When rotated clockwise (toward [MASTER]), the master output audio is produced at the headphones (only when [MASTER] has been selected with the HEADPHONES CUE button); when rotated counterclockwise (toward [CUE]), the headphones output becomes the mixture of the effect monitor and the channel selected with the HEADPHONES CUE button. Use the channel fader lever to adjust the sound volume of the selected channel. To use the cross fader on the selected channel, set the CROSS FADER ASSIGN switch to either cross fader channel A or channel B, and operate the cross fader lever. When not using the cross fader, set the CROSS FADER ASSIGN switch to [THRU]. Use the BALANCE dial to adjust the sound balance between right and left. The BOOTH MONITOR LEVEL dial can be used to adjust the sound volume independently of the MASTER LEVEL dial. When HEADPHONES CUE (MASTER) button is selected, the master audio is output from the R channel. When set to the [STEREO] position, the sound corresponding to the selected HEADPHONES CUE button is output in stereo. When [MONO SPLIT] is selected, use the MIXING dial to adjust the balance of sound between the left channel (sound selected with the HEADPHONES CUE button), and the right channel (the master sound ­ but only when the HEADPHONES CUE button for the [MASTER] is ON). When the MIXING dial is rotated clockwise (toward [MASTER]), the master output (only when the HEADPHONES CUE button for the [MASTER] is ON) increases; when rotated counterclockwise (toward [CUE]), the sound selected with the HEADPHONES CUE button is output. At the left setting, the curve operates to produce a rapid rise as the channel fader approaches its distant position. Use the CROSS FADER curve switch to select the cross fader curve response. [. . . ] When dial is turned fully counterclockwise, only original sound is output. When dial is turned fully counterclockwise, only original sound is output. Sets pitch of robot sound effect within range of ­100 % to +100 %. B], or [MASTER], even if the effect monitor is turned ON, if the selected channel's sound is not output to the master output, the effect sound will not be heard. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER PD-S06




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER PD-S06 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.