User manual PIONEER PD-M427

[. . . ] Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. The line voltage selector switch is located on the rear panel of this player. [. . . ] Operate the player with the remote control unit by aiming it at the amplifier. Be sure to connect both of the control cord's plugs securely to the CONTROL IN and CONTROL OUT terminals. Be sure to turn off the power of the amplifier before connecting the power cord and output cord. Connect the power cord to a household AC wall outlet or an AC outlet on your amplifier. When a Pioneer stereo amplifier bearing the Î mark is used, connect the CONTROL IN jack on the rear panel of the CD player to the CONTROL OUT jack of the amplifier. This will enable the CD player to be controlled using the remote control unit supplied with the stereo amplifier. If you do not plan to use this feature, it is not necessary to connect CONTROL IN/ OUT jacks. The remote control unit supplied with the amplifier can be used to control Play, Stop, Pause, Track/Disc Search and Disc Change operations. Some functions cannot be carried out depending on the connection of AC power cord. Function When the AC power cord is connected to the switched outlet of an amplifier or audio timer Yes No No When the AC power cord is connected to the unswitched outlet of an amplifier or wall outlet No Yes Yes Timer playback Program memory Delete program memory For details, refer to the description of each function in these Operating Instructions. If "no DISC" appears on the display, you have pressed the disc number of a tray which does not contain a disc. While the ¡ ¢ button is kept pressed, playback rapidly advances toward the end of the disc. When playback reaches the end of the disc, the player enters pause mode and "END" is displayed. While the 4 1 button is kept pressed, playback rapidly reverses toward the beginning of the disc. When the desired passage is reached, release the ¡ ¢ button or 4 1 button. The player enters original mode (playback or pause) where ¡ ¢ button or 4 1 button is released. During normal playback, Manual Search can be carried out on one disc only. During program playback, Manual Search can be carried out in one program step only. When the ¡ ¢ button is pressed once or a number of times, playback advances to the beginning of a track located after the track being played. The position of the located track corresponds to the number of times the button is pressed. When the 4 1 button is pressed once, playback returns to the beginning of the track being played. When this button is pressed more than once, playback is returned to a track located before the track being played. [. . . ] Then, press the 4 1 or ¡ ¢ button to select the track number. Press the DELETE button, or wait two seconds; the track to be deleted will be input. If the DELETE button is pressed after selecting the disc number only, the "AL" indicator will appear, indicating selection of the "Disc All Delete" mode (the entire disc contents will be deleted from the program memory). While the "AL" indicator is displayed, however, if the 4 1 or ¡ ¢ button is used to designate a track number and the DELETE button is then pressed (or after two seconds elapses), the selected track will be deleted as that program step. [. . . ]