User manual PIONEER PD-F705

[. . . ] Check that it is set properly before plugging the power cord into the outlet. If the voltage is not properly set or if you move to an area where the voltage requirements differ, adjust the selector switch as follows: CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. Be sure to disconnect the power cord from its outlet before making this adjustment. [. . . ] Correct operation may not be possible if labels or tape are attached in other locations. The following are convenient ways of using labels: A: For titles B: For disc names C: For classification ÷ Do not attach labels on top of other labels. Please use them to make your own disc library, with separate magazines for each artist or genre. NOTE: Do not load 8-cm (3-inch) discs into the magazine for 12-cm (5inch) discs. (When a disc tray has been pulled out, do not pull out other disc trays. ) ÷ If discs are inserted label side upward, it will not be possible for them to be played. Objects other than discs (song cards, explanations of disc contents, etc. Do not touch the playing surface of discs (iridescent side) with hands or fingers. Before making or changing the connections, switch off the STANDBY/ON switch and disconnect the power cord from the AC outlet. Make sure that the white plugs are connected to the left (L) jacks and the red plugs to the right (R) jacks. Be sure not to connect this unit to the amplifier's PHONO jacks, as sound will be distorted and normal playback will not be possible. When inserting a magazine into the player, make sure that the direction of insertion is correct. Do not place in locations subject to high temperatures or exposed to direct sunlight. Application of benzene, thinner, insecticide or other volatile liquids to a magazine may damage the surface, so keep magazines away from such substances. Operations indicated the [ ] mark are performed with the remote control unit. The timer will supply power to both the amplifier and the player at the preset time, turning all the components on and initiating the playback mode. cautions: ÷ Do not unplug the power cord or do not turn off the power with an audio timer during playback, as this could result in damage to the disc. If a power failure occurs while the power is turned off (standby mode), the power is automatically turned on with the timer playback function when the power is restored. To play tracks other than the deleted tracks in a random order, press the RANDOM button after carrying out the Delete Program procedure. When the Hl-LlTE button is pressed once during stop mode, playback starts from a point 1 minute after the beginning of the first track, and the first track of each disc is played for about 10 seconds. After the first tracks of all discs are scanned, the player enters stop mode. When the Hl-LlTE button is pressed twice during stop mode, playback starts from a point 1 minute after the beginning of the track, and each track is played for about 10 seconds. [. . . ] If the 4 1 or ¡ ¢ button is not pressed within 2 seconds when correcting the track number, the displayed track number is automatically memorized. A pause can be programmed only when the program procedure is performed under stop mode. A pause cannot be programmed at the beginning of a program (P­01), nor can two pauses be programmed one after the other ÷ If a pause is programmed as the last step of a program, the player will not enter the pause mode. With the player stopped, press the DELETE button, so that the DELETE indicator lights. [. . . ]