User manual PIONEER PD-F1005

[. . . ] · To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture. · No naked flame sources, such as candles, should be placed on this product. · No objects filled with liquids, such as vases, shall be placed on the apparatus. · Unplug the unit from the wall socket during lightning storms and when it is not going to be used for a long period of time. [. . . ] (Note that the fast forward function does not operate from the remote contol). <<I (skip back/fast reverse) Press this key once to skip backwards to the previous track. (Note that the fast forward function does not operate from the remote contol). Stop During play mode pressing this key will completely stop the hard drive playing, and the LCD will display `Ready'. Note: Unlike playing the CD as described in the previous section, if the play button is pressed again, the PD-F1005 will continue from the previous playing position from the hard drive. The PD-F1005 will also remember the last playing position after the power has been switched OFF. Pressing play from the hard drive menu will resume playing from the same position again. page 8 SEARCH COMMANDS WHEN PLAYING HARD DRIVE SEARCH COMMANDS WHEN PLAYING HARD DRIVE Because the PD-F1005 contains a database of known albums and song titles, it is possible to search the entire contents of the hard drive to find a specific album, song or artist. SEARCH BY ARTIST The PD-F1005 will allow searches by artist, this will show both complete albums by that artist, and also individual tracks within compilation albums. Use the arrow keys on the remote control (12 and 14) to scroll up and down through the choices. Press Play on the remote control to commence playing that album immediately, or press OK on the remote control (15) to select this album. If you press OK the PD-F1005 will then prompt you for further actions. Use the arrow keys on the remote control (12 and 14) to scroll up and down through choices: Play, Delete track, Rename album, Rename track, or Add to Playlist. The following screens will be displayed. Playlists are explained in more detail in the next section. This track can be added either to a new playlist or to an existing play list. Using the arrow keys on the remote control (12 and 14) choose either a new playlist or scroll through existing ones. If no existing playlists are present the PD-F1005 will prompt you to create a new playlist (see playlist commands section) 2. If new playlist has been selected then you will need to enter a name for it using the alpha numeric keys. Press OK to confirm the name of the new play list and add this track to it. If you selected an existing playlist, press OK to add this track to it. Press OK if you wish to delete this track. You will be asked if you are sure, press OK to continue, or press back to exit this function. Note: This process cannot be reversed and the CD will need to be reloaded. page 10 PLAYLIST COMMANDS Use this function to edit the tracks in an existing playlist. Using the arrow keys on the remote control (12 and 14) scroll through the existing playlists. [. . . ] Press OK to confirm your selection, or after a time out period of 30 seconds the PD-F1005 will accept this new output setting and revert back to the normal play menu. The following table represents the respective output senstivity levels for the output level numbers: Volume setting table: Volume 0 Volume 3 Volume 7 Volume 11 Volume 15 Volume 19 Volume 23 Volume 27 Volume 31 2mV 4mV 8mV 17mV 35mV 70mV 140mV 280mV 560mV SOFTWARE REVISION NUMBER It is possible to check the revision number of the software loaded onto the PD-F1005. From the System menu when scrolling through options you will see a screen similar to this: CHECK DISK The PD-F1005 will allow some self diagnostics on the hard drive. This may be necessarry if the PD-F1005 malfunctions or develops a problem. [. . . ]