User manual PIONEER N-50-S

[. . . ] The RDS (radio data system) function only works in areas that broadcast RDS signals for FM stations. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device. If you want to dispose this product, do not mix it with general household waste. [. . . ] PAIRING (auto pairing) If this function is turned on while there is an iPhone connected to the unit by USB, you will be automatically prompted to pair the unit and iPhone. This function may not be available depending on what version of iOS you are using. MISSED (missed call history) DIALLED (dialed call history) RECEIVED (received call history) 1 Press M. PHONE BOOK (phone book) The contacts on your phone will normally be transferred automatically when the phone is connected. You can also use the preset number buttons 1/ to 6/ to recall a preset phone number. For more details about storing phone numbers, refer to Storing and recalling phone numbers on page 9. Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels: — A2DP profile (Advanced Audio Distribution Profile): You can only playback songs on your audio player. The A2DP connection can only be used with APP (smartphone) and BT AUDIO. To use a Bluetooth audio player with this unit, refer to this manual and the manual for your device for operating instructions. As the signal from your cellular phone may cause noise, avoid using it when you are listening to songs on your Bluetooth audio player. The sound of the Bluetooth audio player will be muted when the phone is in use. To cycle between the following: Cut-off frequency—Slope level 3 Turn M. Cut-off frequency: OFF—50HZ—63HZ—80HZ —100HZ—125HZ—160HZ—200HZ Slope level: –12— –24 SLA (source level adjustment) This function prevents the volume from changing too dramatically when the source switches. Each of the below combinations are set to the same setting automatically. Adjustment range: +4 to –4 LANGUAGE (multi-language) This unit can display the text information from a compressed audio file even for information embedded in English, Russian or Turkish. If the embedded language and the selected language setting are not the same, text information may not display properly. 12H (12-hour clock)—24H (24-hour clock) AUTO PI (auto PI seek) The unit can automatically search for a different station with the same programming, even during preset recall. AUX (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. You can also change the dimmer setting by pressing and holding /DIMMER. MUTE MODE (mute mode) Sound from this system is automatically muted or attenuated when a signal from equipment with a mute function is received. 10dB ATT – Attenuation BT AUDIO (Bluetooth audio activation) You need to activate the BT AUDIO source in order to use a Bluetooth audio player. PW SAVE (power saving) Switching this function on enables you to reduce the consumption of battery power. [. . . ] There may be a slight delay at the start of playback of audio files embedded with image data or audio files stored on a USB storage device that has numerous folder hierarchies. Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, smart phones, or other devices while using this product. Do not leave a USB storage device in any place that is subject to high temperatures. Audiobook, Podcast: Compatible English CAUTION iPod compatibility This unit supports only the following iPod models. [. . . ]