User manual PIONEER MVH-X560BT

[. . . ] ователя Italiano Español Deutsch Nederlands Русский <QRD3242-A>1 Black plate (2, 1) Section 01 Before you start Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. [. . . ] Rtrv to cycle between: 1—2—OFF (off) 1 is effective for low compression rates, and 2 is effective for high compression rates. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on page 11. POWERFUL—NATURAL—VOCAL—CUSTOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected. However, each of the below combinations are set to the same setting automatically. To cycle between the following: Equalizer band—Equalizer level 5 Turn M. 5KHZ—8KHZ Equalizer level: +6 to –6 LOUDNESS (loudness) Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume. W (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. W CTRL (subwoofer adjustment) Only frequencies lower than those in the selected range are outputted from the subwoofer. To cycle between the following: Cut-off frequency—Output level—Slope level Rates that can be adjusted will flash. HPF SETTING (high pass filter adjustment) Use this function when wanting to listen only to high-frequency sounds. Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers. To cycle between the following: Cut-off frequency—Slope level 3 Turn M. En 11 <QRD3242-A>11 Black plate (12, 1) Section 02 Using this unit Using this unit SLA (source level adjustment) This function prevents the volume from changing too dramatically when the source switches. Each of the below combinations are set to the same setting automatically. 12H (12-hour clock)—24H (24-hour clock) INFO DISPLAY (sub information) The type of text information displayed in the sub information section can be toggled. The signal bar indicator displays for SPEANA or LEVEL METER when the source is set to RADIO. AUTO PI (auto PI seek) The unit can automatically search for a different station with the same programming, even during preset recall. AUX (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. You can also change the dimmer setting by pressing and holding /DIMMER. BRIGHTNESS (brightness adjustment) You can use this setting to adjust the display brightness. The range of settings available for BRIGHTNESS will vary depending on whether DIMMER is on or off. DIMMER on: 1 to 4 DIMMER off: 1 to 5 BT AUDIO (Bluetooth audio activation) You need to activate the BT AUDIO source in order to use a Bluetooth audio player. [. . . ] There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. IPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) iPhone 5 iPhone 4S iPhone 4 iPhone 3GS iPhone 3G iPhone Example of a hierarchy 01 02 D: C :Х D: C :Ц :Ь D: C :Ч :Э D: C : Ш, Щ :Ю D: C :Ъ :Я 03 04 05 Depending on the generation or version of the iPod, some functions may not be available. Users of iPod with the Lightning Connector should use the Lightning to USB Cable (supplied with iPod). Audiobook, Podcast: Compatible Level 1 Level 2 Level 3 Level 4 : Folder : Compressed audio file 01 to 05: Folder number 1 to 6: Playback sequence :Ы D: Display C: Character Bluetooth profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. [. . . ]