User manual PIONEER MVH-X380BT

[. . . ] Before You Start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. English If you want to dispose this product, do not mix it with general household waste. [. . . ] Purpose Select a track Fast forward or reverse Pause/resume playback Operation Press or . Press and hold Press BAND/ For iPhone users This function is compatible with iPhones and iPod touches installed with iOS 5. For Android device users This function is compatible with devices that have Android OS 2. 3 or later installed and also support Bluetooth SPP (Serial Port Profile) and A2DP (Advance Audio Distribution Profile). 14 En Car Remote Mode (Car remote mode for iPhone is not available for MVH-180UBG/180UB/181UB. ) You can operate the unit from a car remote application installed on an iPhone/ Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc. For details on what operations are available on the application, see the application’s help section. Proceed to step 9 if you select the USB connection for iPhone or the Bluetooth connection. APP AUTO ON] (page 19), the car remote application on the Android device starts automatically, and all the steps are finished. NOTE If the car remote application has not been installed on your Android device yet, a message that prompts you to install the application will appear on your Android device. (Available for MVH-180UI/180UBG/180UB/181UB) Change the playback speed. Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers. HPF SETTING Cut-off frequency: [OFF], [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ] Slope level: [–12], [–24] En 17 Menu Item SLA [+4] to [–4] Description Adjust the volume level for each source except FM. Each of the below combinations are set to the same setting automatically. € USB, iPod, ANDROID, and APP (iPhone) • BT AUDIO, ANDROID, and APP (Android) Menu Item USB AUTO [ON], [OFF] Description Select [ON] to automatically switch to [USB] source when a USB device/iPod is connected to the unit. Select [OFF] when a USB device/iPod is being connected to the unit just for charging. Mute or attenuate sound automatically when a signal from equipment with a mute function is received. Turning on the source is the only operation allowed when this function is on. Clear the Bluetooth device data (device list, PIN code, call history, phone book, preset phone numbers) stored in the unit. *2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 7). BT AUDIO [ON], [OFF] MUTE MODE (Only for MVH-180UI) [MUTE], [20dB ATT], [10dB ATT] PW SAVE* [ON], [OFF] SYSTEM settings You can also access to these menus when the unit is turned off. [. . . ] 1 kHz (MS ADPCM) Compressed audio compatibility • Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. 1 kHz, 48 kHz Sampling frequency USB device • There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. Sampling frequency En 25 Playable folder hierarchy Playable folders Playable files Playback of copyrightprotected files Partitioned USB device Up to eight tiers (A practical hierarchy is less than two tiers. ) Up to 500 Up to 15 000 Not compatible Only the first partition can be played. [. . . ]