User manual PIONEER MVH-X360BT

[. . . ] ователя Italiano Español Deutsch Nederlands Русский <QRD3211-B>1 Black plate (2, 1) Section 01 Before you start Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. [. . . ] Depending on the type of Bluetooth audio player you have connected to this unit, operation and information display may not be available for some functions. Setting up for Bluetooth audio Before you can use the Bluetooth audio function you must set up the unit for use with your Bluetooth audio player. 10 En <QRD3211-B>10 Black plate (11, 1) Section Using this unit Using this unit 02 1 Connection Use the Bluetooth telephone connection menu. Operations using special buttons Selecting a repeat play range to select a repeat play range from 1 Press 6/ one or all. This function may not be available depending on the type of Bluetooth audio player connected. The repeat play range varies depending on the Bluetooth audio player in use. The random play range varies depending on the Bluetooth audio player in use. Enhancing compressed audio and restoring rich sound (sound retriever) Only for MVH-160UI 1 Press 3/S. Rtrv to cycle between: 1—2—OFF (off) 1 is effective for low compression rates, and 2 is effective for high compression rates. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on page 11. Switching the display Selecting the desired text information 1 Press DISP to cycle between the following: !POWERFUL—NATURAL—VOCAL—CUSTOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected. However, each of the below combinations are set to the same setting automatically. To cycle between the following: Equalizer band—Equalizer level 5 Turn M. 5KHZ—8KHZ Equalizer level: +6 to –6 LOUDNESS (loudness) Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume. W (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. 11 <QRD3211-B>11 Black plate (12, 1) Section 02 Using this unit Using this unit Only frequencies lower than those in the selected range are outputted from the subwoofer. To cycle between the following: Cut-off frequency—Output level—Slope level Rates that can be adjusted will flash. HPF SETTING (high pass filter adjustment) Use this function when wanting to listen only to high-frequency sounds. Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers. To cycle between the following: Cut-off frequency—Slope level 3 Turn M. Cut-off frequency: OFF—50HZ—63HZ—80HZ —100HZ—125HZ—160HZ—200HZ Slope level: –12— –24 SLA (source level adjustment) This function prevents the volume from changing too dramatically when the source switches. [. . . ] IPhone Depending on the generation or version of the iPod, some functions may not be available. Users of iPod with the Lightning Connector should use the Lightning to USB Cable (supplied with iPod). Pioneer accepts no responsibility for data lost on the iPod, even if that data is lost while this unit is used. Sequence of audio files The user cannot assign folder numbers and specify playback sequences with this unit. [. . . ]