User manual PIONEER MVH-8250BT

[. . . ] To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. ­ Basic Operations 17 ­ Selecting and playing files/tracks from the name list 18 ­ Browsing for a song on the iPod 18 ­ Function settings 18 Playing still images 20 ­ Basic Operations 20 ­ Selecting and playing files from the name list 21 ­ Function settings 21 ­ Introduction of operations for playback of still images as a slideshow 22 Bluetooth Telephone 23 ­ Connection menu operation 23 ­ Phone menu operation 24 ­ Function and operation 25 Audio Adjustments 25 System settings 27 Entertainment settings 28 ­ Customizing the illumination color 28 Initial Settings 29 ­ Auto EQ (auto-equalizing) 30 Other Functions 32 ­ Using an AUX source 32 ­ Switching the display indication 32 Detailed instructions Changing the wide screen mode 33 Setting the DivX subtitle file 33 Setting the aspect ratio 33 Displaying the DivXâ VOD registration code 34 Displaying the deactivation code 34 Changing the picture adjustment 34 Additional Information Troubleshooting 35 Error messages 35 Understanding auto EQ error messages 38 Indicator list 38 Precautions IMPORTANT SAFEGUARDS 4 To ensure safe driving 4 To avoid battery exhaustion 5 Before You Start About this unit 6 Operating environment 6 In case of trouble 6 Resetting the microprocessor 6 Demo mode 6 About this manual 6 Operating this unit Head unit 7 Remote control 7 Basic Operations 8 Use and care of the remote control 9 Basic menu operations 9 ­ Menu operations identical for function settings/audio adjustments/initial settings/lists 10 Customizing menus 10 ­ Canceling a Registered Menu 10 About guide information 10 Using Bluetooth telephone 11 ­ Setting up for hands-free phoning 11 ­ Basic Operations 11 Radio 12 ­ Basic Operations 12 ­ Storing and recalling stations 12 ­ Function settings 12 Playing moving images 13 ­ Basic Operations 13 ­ Selecting and playing files from the name list 14 ­ Browsing for a video on the iPod 14 ­ Playing DivXâ VOD content 14 ­ Function settings 15 Playing audio 17 Please read all of these instructions regarding your display and retain them for future reference. [. . . ] Only frequencies higher than those in the selected range are output from the front or rear speakers. SLA (source level adjustment) SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust. Operation is complete even if the menu is cancelled before being confirmed. After selecting, perform the following procedures to set the system function. Brightness--Contrast--Color--Hue--Dimmer --Temperature--Black Level For details about the settings, refer to Changing the picture adjustment on page 34. If the embedded language and the selected language setting are not the same, text information may not be displayed properly. To complete this operation, switch the ignition key off and on after you set this setting. Detach Warning (warning tone setting) If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. AUX Input (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. After selecting, perform the following procedures to set the entertainment function. BGP1 (background picture 1)--BGP2 (background picture 2)--BGP3 (background picture 3) --BGV (background visual)--Photo (photo)-- SPEANA (spectrum analyzer)--Off (display off) 3 Press M. After selecting, perform the following procedures to set the initial setting. FM step (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. AM step (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). A-EQ Measurement (auto-equalizing) The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equalizing) on the next page). Rear Speaker (rear output and subwoofer setting) This unit's rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Subwoofer1 (subwoofer on/off setting) on page 26). If you change this setting, subwoofer output in the audio menu will return to the factory settings. Video Signal (video signal setting) Be sure to adjust the video signal setting to one that is suitable for your country. [. . . ] Other trademarks and trade names are those of their respective owners. MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i. Revenuegenerating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/ or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. A small fluorescent tube is used inside the display to illuminate the LCD screen. [. . . ]