User manual PIONEER MVH-7350

[. . . ] To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. ­ Basic operations 17 ­ Selecting and playing files/tracks from the name list 18 ­ Browsing for a song on the iPod 18 ­ Function settings 18 Playing still images 20 ­ Basic operations 20 ­ Selecting and playing files from the name list 21 ­ Function settings 21 ­ Introduction of operations for playback of still images as a slideshow 22 Bluetooth Telephone 23 ­ Connection menu operation 23 ­ Phone menu operation 24 ­ Function and operation 25 Audio Adjustments 26 System settings 27 Entertainment settings 28 ­ Customizing the illumination color 29 Initial Settings 29 ­ Auto EQ (auto-equalizing) 30 Other functions 32 ­ Using an AUX source 32 ­ Switching the display indication 33 Detailed instructions Changing the wide screen mode 34 Setting the DivX subtitle file 34 Setting the aspect ratio 34 Displaying the DivXâ VOD registration code 34 Displaying the deregistration code 35 Changing the picture adjustment 35 Additional information Troubleshooting 36 Error messages 36 Understanding auto EQ error messages 38 Indicator list 39 Precautions IMPORTANT SAFEGUARDS 4 To ensure safe driving 4 To avoid battery exhaustion 5 Before you start About this unit 6 Operating environment 6 In case of trouble 6 Resetting the microprocessor 6 Demo mode 6 About this manual 6 Operating this unit Head unit 7 Remote control 7 Basic operations 8 Use and care of the remote control 9 Basic menu operations 9 ­ Menu operations identical for function settings/audio adjustments/initial settings/lists 10 Customizing menus 10 ­ Canceling a Registered Menu 10 About guide information 10 Using Bluetooth telephone 11 ­ Setting up for hands-free phoning 11 ­ Basic operations 11 Radio 12 ­ Basic operations 12 ­ Storing and recalling stations 12 ­ Function settings 12 Playing moving images 13 ­ Basic operations 13 ­ Selecting and playing files from the name list 14 ­ Browsing for a video on the iPod 14 ­ Playing DivXâ VOD content 14 ­ Function settings 15 Playing audio 17 Please read all of these instructions regarding your display and retain them for future reference. [. . . ] Subwoofer1 (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. Subwoofer2 (subwoofer adjustment) The cut-off frequency and output level can be adjusted when the subwoofer output is on. Only frequencies lower than those in the selected range are outputted from the subwoofer. After selecting, perform the following procedures to set the system function. Brightness--Contrast--Color--Hue--Dimmer --Temperature--Black Level For details about the settings, refer to Changing the picture adjustment on page 35. High Pass Filter (high pass filter adjustment) When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. SLA (source level adjustment) SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Note You cannot select Custom1 and Custom2 when using the auto-equalizer. After selecting, perform the following procedures to set the entertainment function. BGP1 (background picture 1)--BGP2 (background picture 2)--BGP3 (background picture 3) --BGV (background visual)--Photo (photo)-- SPEANA (spectrum analyzer)--Off (display off) 3 Press M. If the embedded language and the selected language setting are not the same, text information may not display properly. To complete this operation, switch the ignition key off and on after you set this setting. Detach Warning (warning tone setting) If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. AUX Input (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. After selecting, perform the following procedures to set the initial setting. FM step (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. AM step (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). A-EQ Measurement (auto-equalizing) The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equalizing) on the next page). This unit's rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. [. . . ] If you notice smoke, a strange noise or smell, or any other abnormal signs from the display, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Service Station. At low temperatures, using the LED backlight may increase image lag and degrade the image quality due to the characteristics of the LCD screen. To protect the LED backlight, the display will darken in the following environments: -- In the direct sunlight -- Near the heater vent !If the LED backlight reaches the end of its product lifetime, the screen will become dark and the image will no longer be projected. [. . . ]