User manual PIONEER MVH-150UI

[. . . ] ователя Italiano Español Deutsch Nederlands Русский Section 01 Before you start Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. [. . . ] The repeat play range varies depending on the Bluetooth audio player in use. The random play range varies depending on the Bluetooth audio player in use. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on this page. 10 En Section Operating this unit Operating this unit 02 3 Turn M. For details, refer to SP-P/O MODE (rear output and preout setting) on the next page. W CTRL and HPF SETTING are not available when REAR/REAR is selected in SP-P/O MODE. For details, refer to SP-P/O MODE (rear output and preout setting) on the next page. POWERFUL—NATURAL—VOCAL—CUSTOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected. To cycle between the following: Equalizer band—Equalizer level 5 Turn M. 5KHZ—8KHZ Equalizer level: +6 to –6 LOUDNESS (loudness) Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume. W (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. W CTRL (subwoofer adjustment) Only frequencies lower than those in the selected range are outputted from the subwoofer. To cycle between the following: Cut-off frequency—Output level—Slope level Rates that can be adjusted will flash. HPF SETTING (high pass filter adjustment) When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. To cycle between the following: Cut-off frequency—Slope level 3 Turn M. Cut-off frequency: OFF—50HZ—63HZ—80HZ —100HZ—125HZ—160HZ—200HZ Slope level: –6— –12 SLA (source level adjustment) English SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Adjustment range: +4 to –4 System menu Important PW SAVE (power saving) is canceled if the vehicle battery is disconnected and will need to be turned back on once the battery is reconnected. When PW SAVE (power saving) is off, depending on connection methods, the unit may continue to draw power from the battery if your vehicle’s ignition doesn’t have an ACC (accessory) position. BT AUDIO, BT MEM CLEAR and BT VERSION are not available for MVH-150UI. En 11 Section 02 Operating this unit Operating this unit LANGUAGE (multi-language) This unit can display the text information from a compressed audio file even for information embedded in English or Russian. If the embedded language and the selected language setting are not the same, text information may not display properly. [. . . ] Revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/ streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. English 03 04 05 Level 1 Level 2 Level 3 Level 4 : Folder : Compressed audio file 01 to 05: Folder number 1 to 6: Playback sequence :Ы D: Display C: Character Bluetooth profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. 3 USB storage device Playback sequence is the same as recorded sequence in the USB storage device. To specify the playback sequence, the following method is recommended. [. . . ]