User manual PIONEER KEH-P4025

[. . . ] Multi-CD control High power cassette player with FM/AM tuner English Espaol Operation Manual Portugus (B) KEH-P4025 WOdFë Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Before You Start About this manual 2 Precautions 2 What's what 3 Optional remote control 4 Protecting your unit from theft 5 Removing the front panel 5 Attaching the front panel 5 Power ON/OFF Turning the unit on 6 Selecting a source 6 Turning the unit off 6 Tuner Listening to the radio 7 Storing and recalling broadcast frequencies 8 Tuning in strong signals 8 Storing the strongest broadcast frequencies 8 Cassette Player Playing a tape 9 Repeating play 10 Skipping blank tape sections 10 Radio intercept 10 Multi-CD Player Playing a CD 10 50-disc multi-CD player 11 Repeating play 11 Playing tracks in a random order 12 Scanning CDs and tracks 12 Pausing CD playback 12 Audio Adjustments Introduction of audio adjustments 13 Using balance adjustment 13 Using the equalizer 14 Recalling equalizer curves 14 Adjusting equalizer curves 14 Adjusting loudness 14 Front image enhancer (FIE) 15 Adjusting source levels 15 Initial Settings Adjusting initial settings 16 Setting the time 16 Setting the FM tuning step 16 Setting the AM tuning step 17 Switching the auxiliary setting 17 Additional Information Setting the time display on or off 17 Using the AUX source 17 Selecting AUX as the source 17 Cassette tapes 18 Cleaning the playback head 18 Music search and repeat functions 18 Specifications 19 1 En Before You Start About this manual This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not selfexplanatory. This operation manual will help you benefit fully from this product's potential and to maximize your listening enjoyment. [. . . ] Press REPEAT/RANDOM until the desired repeat range appears in the display. Nothing's displayed -- Repeat all discs in the multi-CD player RPT -- Repeat just the current track DISC -- Repeat the current disc Notes If you select other discs during repeat play, the repeat play range changes to multi-CD player repeat. If you perform track search or fast forward/reverse during RPT (one-track repeat), the repeat play range changes to DISC (disc repeat). 11 En Multi-CD Player Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, multi-CD player repeat and disc repeat. 2 Press and hold REPEAT/RANDOM for about two seconds to turn random play on. DRDM (random playing in a disc) or RDM (random playing in a magazine) appears in the display. Tracks will play in a random order within the previously selected multi-CD player repeat or disc repeat ranges. 3 Press and hold REPEAT/RANDOM for about two seconds to turn random play off. Tracks will continue to play in order. 3 When you find the desired track (or disc) press and hold PAUSE/SCAN for about two seconds to turn scan play off. Note After track or disc scanning is finished, normal playback of the tracks will begin again. English Espaol Pausing CD playback Pause lets you temporarily stop playback of the CD. Play will resume at the same point that you turned pause on. Deutsch Scanning CDs and tracks While you are using DISC (disc repeat), the beginning of each track on the selected disc plays for about 10 seconds. When you are using multi-CD player repeat, the beginning of the first track of each disc is played for about 10 seconds. 2 Press and hold PAUSE/SCAN for about two seconds to turn scan play on. DSCN (scanning tracks) or SCAN (scanning discs) appears in the display. The first 10 seconds of each track of the present disc (or the first track of each disc) is played. En 12 Franais Italiano Nederlands Audio Adjustments Introduction of audio adjustments Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. If the balance setting has been previously adjusted, BAL will be displayed. Each press of 5 or moves the front/rear speaker balance towards the front or the rear. FAD F15 FAD R15 is displayed as the front/rear speaker balance moves from front to rear. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. BAL L9 BAL R9 is displayed as the left/right speaker balance moves from left to right. 1 2 1 AUDIO display Shows the audio adjustments status. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)--EQ-L (equalizer)-- LOUD (loudness)--FIE (front image enhancer)--SLA (source level adjustment) When selecting the FM tuner as the source, you cannot switch to SLA. To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. 13 En Audio Adjustments Using the equalizer The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. Adjusting equalizer curves English You can adjust the currently selected equalizer curve setting as desired. Press AUDIO until EQ-L/EQ-M/EQ-H appears in the display. Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. [. . . ] When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 1, 602 kHz allowable) to 10 kHz (530 1, 640 kHz allowable). The selected AM tuning step will appear in the display. Using the AUX source An IP-BUS-RCA Interconnector such as the CD-RB20 or CD-RB10 (sold separately) lets you connect this unit to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner`s manual. Selecting AUX as the source Press SOURCE to select AUX as the source. For more details, see Switching the auxiliary setting on this page. Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. [. . . ]