User manual PIONEER KEH-P3700R

[. . . ] 3 Pay close attention to all warnings in this manual and follow the instructions carefully. 4 Do not allow other persons to use this system until they have read and understood the operating instructions. 5 Do not install the display where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including air bags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. 6 Do not operate this display if doing so in any way will divert your attention from the safe operation of your vehicle. [. . . ] It is possible to connect a portable audio/ video player by using a 3. 5 mm plug (4 pole) to RCA cable, which is sold separately. However, depending on the cable, reverse connection between Red (right side audio) cable and yellow (video) cable is required. Otherwise, audio and video may not be correctly reproduced. 2 Press and hold EJECT (h). 3 Touch each of the arrows on the four corners of the screen with the touch panel adjustment pen. # To cancel the adjustment, press and hold VOLUME/MUTE. 4 Press EQ to complete the 4-point adjustment. The adjusted position data is saved. # Do not turn off the engine while saving the adjusted position data. En 51 Section 03 Operating this unit % Insert the mini plug into the AUX input jack on this unit. 6 Touch ESC to return to the ordinary display. IP-BUS-RCA interconnector (AUX 2) When connecting auxiliary device using an IPBUS-RCA Interconnector (sold separately) % Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary device featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner's manual. # You can only make this type of connection if the auxiliary device has RCA outputs. Using the external unit External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit. Allocated functions are different depending on the connected external unit. For details concerning functions, refer to external unit's owner's manual. Selecting AUX as the source % Touch the source icon and then touch AUX 1/AUX 2 to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 44. Setting the AUX title The title displayed for the AUX source can be changed. 3 Connection indicator Shows the Bluetooth wireless connection status. 1 Touch the source icon and then touch BT Audio to select the Bluetooth audio source. # For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wireless connection. (Refer to Connecting a Bluetooth audio player on the next page. ) 2 Touch d. 5 To stop playback, touch g. For details concerning operation, refer to the Bluetooth adapter's operation manual. This section provides brief information on Blue- 54 En Section Available accessories Pausing playback % Touch e during playback. # To resume playback at the same point that you turned pause on, touch d. 04 Displaying BD (Bluetooth Device) address % Touch DEVICE INFO on the function menu to display the BD address. Various information regarding the Bluetooth wireless technology are displayed. Introduction of advanced operations 1 Touch AV MENU and then touch FUNCTION MENU to display the function names. 2 Touch ESC to return to the ordinary display. # To return to the previous display, touch BACK. Available accessories !BT MODULE VERSION (version of Bluetooth module) Connecting a Bluetooth audio player % Touch CONNECTION OPEN on the function menu to turn the connection open on. This unit is now on standby for connection from Bluetooth audio player. If your Bluetooth audio player is set ready for Bluetooth wireless connection, connection to this unit is automatically established. Note Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documentation. Refer to Entering PIN code for Bluetooth wireless connection on page 46. Disconnecting a Bluetooth audio player % Touch DISCONNECT on the function menu. [. . . ] 5 Hz to 44 000 Hz (with DVD, at sampling frequency 96 kHz) Signal-to-noise ratio . . . . . . . . . . . . . . . 97 dB (1 kHz) (IEC-A network) (CD: 96 dB (1 kHz) (IEC-A network)) (RCA level) Output level: Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 7. 1, 8, 9, 10, 11 (2ch audio) (Windows Media Player) AAC decoding format . . . . . . . . . . . . 7. 0 inch wide/16:9 (effective display area: 154 × 87 mm) Pixels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]