User manual PIONEER GEX-P700DAB annexe 1

[. . . ] This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. [. . . ] With Dynamic Label longer than 9 letters, you can scroll to see the rest of the text by pressing the 5 button for 2 seconds. Each press of the FUNCTION button selects the mode in the following order: Service List (SRVC. list) = Language Filter (Language Filter) = Announcement Support (Announcement Support) = Service Follow (Service Follow) = Service Component (Primary/Secondary)* = Dynamic Label (DAB Text)** * You cannot switch to this mode with a Service that has just one Service Component. **You cannot switch to this mode with a Service Component that has no Dynamic Label. After entering the Function menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled. Using the DAB Functions with DEH-P9100R You can also select and recall the desired Service directly with the 1 to 6 buttons. When you select another Ensemble or Service, or perform PTY Search, you can set the unit to give priority to Service Components broadcast in a desired language. If you switch the Language Filter Function ON when you have set more than 6 Languages, the Languages least recently set are switched OFF. The Languages that can be set with this unit are the 29 Languages shown below. (The switching order differs from that indicated in the display during Language Filter mode operation. Using the DAB Functions with DEH-P9100R announcement Support Function Even when listening to non-DAB sources, the Announcement Support Function lets you automatically listen to set Announcement Support. When the interrupting announcement ends, play returns to the original source. When listening to a DAB broadcast, you can switch setting for announcement interruption ON/OFF, except for Alarm announcements. Switching between Announcements is as follows: Announcement that is always ON: Each time you press the TA button, the announcement is switched ON/OFF. When listening to FM, turning ON/OFF the RDS TA function will simultaneously turn ON/OFF the DAB Road Traffic Flash and Transport Flash. To cancel a Road Traffic Flash or Transport Flash interruption and return to the original source, press the TA button during an Announcement interruption. When the following conditions arise, the TP indicator " " goes out, and after 30 seconds, the TP Alarm beeps for 5 seconds, reminding you to select a Service Component supporting Road Traffic Flash and Transport Flash. When this unit (during DAB reception) cannot clearly receive a Service Component supporting Road Traffic Flash and Transport Flash. When Head Unit RDS cannot receive a TP or enhanced other network's TP station broadcast. When listening to a DAB broadcast, after hearing the TP Alarm, you should re-tune to a Service that supports Road Traffic Flash and Transport Flash if you want to continue the possibility to receive them. When listening to any other sources, 30 seconds after " " is displayed before going out, search automatically starts for a Service Component in that area that supports Road Traffic Flash and Transport Flash. Using the DAB Functions with DEH-P9100R When "Announce" is ON, "Warning/Service", "Event Announcement" and "Special Event" in Announce are also switched ON. [. . . ] When the interrupting announcement ends, play returns to the original source. When listening to a DAB broadcast, you can switch setting for announcement interruption ON/OFF, except for Alarm announcements. Switching between Announcements is as follows: Announcement that is always ON: Each time you press the TA button on the Remote Controller, the announcement is switched ON/OFF. When listening to FM, turning ON/OFF the RDS TA function will simultaneously turn ON/OFF the DAB Road Traffic Flash and Transport Flash. [. . . ]