User manual PIONEER DJM-T1

[. . . ] The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] )] button is pressed and held in after returning to the cue point, playback continues as long as the button is held. Press the [FX 1] button: TRAKTOR effect unit [FX 1] is assigned to the deck whose button is pressed. Press the [FX 2] button: TRAKTOR effect unit [FX 2] is assigned to the deck whose button is pressed. * When using TRAKTOR SCRATCH DUO 2 , the assignment is fixed: [FX 1] to deck [A] , [FX 2] to deck [B]. If you upgrade to TRAKTOR SCRATCH PRO 2, [FX 1] and [FX 2] can be assigned freely to the desired deck. Press: The [BPM] and [Beat Grid] of the track for the deck whose button was pressed are synchronized to the master for synchronization. [SHIFT] + press: The deck whose button was pressed is set as the master for synchronization. Synchronizing the playing speed with other decks (beat sync) 1 Press the [SYNC (MASTER)] button while pressing the [SHIFT] button on the currently playing deck. The deck whose button was pressed is set as the master for synchronization. 2 Press the [SYNC (MASTER)] button on the deck not set as the master for synchronization. The [BPM] and [Beat Grid] of the track for the deck not set as the master for synchronization are synchronized to the [BPM] and [Beat Grid] of the track for the deck set to the master for synchronization. For information about setting the master for synchronization, see Setting the master for synchronization on page 15. The beat sync function may not operate properly in the following cases. -- When the [BPM] of the track for the deck set as the master for synchronization is out of the adjustable tempo range of the track for the deck to be synchronized. The master for synchronization can be selected from one of the two types below. When two decks are playing and the deck set as the master is paused, the other deck is automatically set as the master. If you upgrade to TRAKTOR SCRATCH PRO 2, you can select [MASTER] or [AUTO]. Adjusts the audio level output from the [MASTER1] and [MASTER2] terminals. Do not pull on the channel fader and crossfader knobs with excessive force. Select the input source of each channel from the components connected to this unit. Select the input source of each channel from the components connected to this unit. The sound of the respective channels is output according to the curve characteristics selected with the [CROSS F. [. . . ] The [SYNC] function will not operate normally if the [BPM] of the track for which the [MASTER] icon is lit is out of the adjustable tempo range for the track for which the [SYNC] icon is lit. Double-click the track information display section (the part where the track name, BPM, etc. If you upgrade to TRAKTOR SCRATCH PRO 2, the effect panel can be switched to the [Single] mode. (page 24) To operate DJ software with this unit, this unit's MIDI messages must be assigned to the DJ software you are using. [. . . ]