User manual PIONEER DEH-P945R

[. . . ] If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. [. . . ] Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 27). If you change this setting, subwoofer output in the audio menu return to the factory settings. The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off. If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Note You can also turn on or off reverse mode by pressing BAND while this unit is turned off. To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. With some Bluetooth audio players, you may be required to enter to this unit in advance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player. 3 Push MULTI-CONTROL left or right to move the cursor to the previous or next position. When you press MULTI-CONTROL again on the same display, the PIN code you entered is stored in this unit. However, if folder 01 (ROOT) contains no files, playback commences with folder 02. 3 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right. Play mode, Random mode, Scan mode and Pause operations are basically the same as that of the built-in CD player. But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the USB portable audio player/USB memory are as below: !All repeat ­ Repeat all files Refer to Playing tracks in random order on page 19. If you select another folder during repeat play, the repeat play range changes to All repeat. If you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Folder repeat. When Folder repeat is selected, it is not possible to play back a subfolder of that folder. After file or folder scanning is finished, normal playback of the files will begin again. If the characters recorded on the audio file are not compatible with this unit, those characters will not be displayed. [. . . ] Depending on the version of Windows Media Player used to encode WMA files, album names and other text information may not be correctly displayed. Depending on the software (or the version of the software) used to encode the audio files, this unit may not operate properly. There may be a slight delay when starting playback of WMA/AAC files encoded with image data. Compressed audio files are not compatible with packet write data transfer. [. . . ]