User manual PIONEER DEH-P6750MP

[. . . ] This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. [. . . ] In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds. After selecting the desired repeat play range from those referred to in "Repeat Play" on page 37, switch Multi-CD Player Scan Play ON. When you find the desired track (or disc), cancel the Scan Play with the button. One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON. (Compression) function adjusts imbalances between loud and subdued sounds at higher volumes. The ITS function allows you to search for the track you wish to play when a Multi-CD player is installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs. Programmed tracks are played within the selected repeat play range in the "Repeat Play" on page 37. After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that has not been played back for the longest time. ITS Play of tracks is performed within the play range explained in the "Repeat Play" section. After selecting the desired repeat play range from those referred to in "Repeat Play" on page 37, switch ITS Play ON. When you have performed Auto-equalizing (refer to page 56), you can turn AUTO EQ ON and OFF by pressing the button for the equalizer curve that was called. Adjustment can be made by either using Graphic Equalizer or 13-Band Graphic Equalizer Adjustment. The sound field control function (SFC) incorporates 3 programs for reproducing typical sound fields of a studio etc. This function makes it possible to reproduce a realistic sound field of a studio etc. Select the desired sound field program in the following order: One way to assure a more natural sound is to clearly position the stereo sound image (putting you in the center of the sound field). The Position Selector function adjusts volume level of sound from each speaker to match seat positions and the number of people in the car, and lets you recall settings at the touch of a button. The result is a natural sound regardless of the seat you are sitting in. This lets you confirm current Position setting without switching to the Position Selector mode. In the Audio Menu 2, you can operate convenient, complex functions for each source. After entering the Audio Menu 2, if you do not perform an operation within about 30 seconds, the Audio Menu 2 is automatically canceled. The Subwoofer output phase can be switched between normal, or 0° ("Phase:NOR"), and reverse, or 180°("Phase:REV"). [. . . ] If the correct door system type has been selected then the Display will show "Current mode: Close". if not , select the alternative door system type by pressing the 2 or 3 button. Lastly, confirm each door triggers the Alert by opening and closing each vehicle's door. As the vehicle's door is opened the display should change accordingly ("Current mode: Close" ­ "Current mode: Open"). [. . . ]