User manual PIONEER DEH-P3000R

[. . . ] There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. [. . . ] If you no longer need to use a registered phone with this unit, you can delete it from the registration assignment for another phone. If a registered phone is deleted from this unit, the Phone Book and other settings of that phone are cleared simultaneously. , PHONE 1, P1) appears in the display, then press FUNCTION to select one of the phone user settings. After phone user setting is displayed, press FUNCTION until the desired phone user setting (e. When you are done using your phone with this unit, you can close the Bluetooth wireless connection. 3 Push MULTI-CONTROL up again to disconnect a cellular phone from this unit. # If you do not want to delete phone that you have selected, push MULTI-CONTROL down to return to DELETE PHONE. Use the Phone Book to browse for numbers on the unit's display and select numbers to call. Names and phone numbers stored in a registered user phone's address book can be transferred to the Phone Book, allowing you to fill the Phone Book quickly and easily with your contacts. For detailed instruction on this, refer to the instruction manual that came with your cellular phone. Denominator shows the maximum number that can be stored and numerator shows the progress status. The estimated call time appears in the display (this may differ slightly from the actual call time). 7 Push MULTI-CONTROL right to move the cursor to the next character position. When the letter you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next letter. 8 Push and hold MULTI-CONTROL right until the beep sounds after editing name. You can clear memory of each item; Phone Book, dialled/received/missed call history list and preset phone number. After phone user setting is displayed, press FUNCTION until CLR MEMO appears in the display. Each time MULTI-CONTROL is pushed left or right, the items are selected in the following order: PH BOOK (phone book)--MISSED (missed call history)--DIALLED (dialled call history)-- RECEIVE (received call history)--PRESET (preset phone numbers)--ALL (delete all memory) # If you select ALL, all memory regardless of items will be cleared. # If guest phone is connected to this unit via Bluetooth wireless technology, PH BOOK cannot be selected. The ten most recent calls made (dialled), received and missed, together with their times and dates, are stored in the Call History. The Call History is divided into three groups: Missed calls, Dialled calls, and Received calls. You can see the time and date of the call, as well as the number (and name if the number is in the Phone Book). [. . . ] However, there is a delay in the start of playback on discs with numerous tiers. For this reason we recommend creating discs with no more than 2 tiers. The higher the rate, the more information is available to reproduce the sound. Using the same encoding method (such as MP3), the higher the rate, the better the sound. [. . . ]