User manual PIONEER DEH-M6356ZH

[. . . ] The proper Honda CD changer (MD Player) (sold separately) is required to play CDs (MDs). Playing of a CD (MD) is started by pressing button [9], and stopped by pressing button [15]. Bass intensity is gradually increased by turning dial [10] to the right, and decreased by turning dial [10] to the left. Treble intensity is gradually increased by turning dial [10] to the right, and decreased by turning dial [10] to the left. [. . . ] Press button [15] for 2 seconds or longer to select the function setting mode. Auto PI Search (for preset station) When preset stations cannot be recalled, as when traveling long distances, the product can be set to perform PI Search also during preset recall. Press button [15] for 2 seconds or longer to select the function setting mode. When you recall preset stations, the tuner may update the preset after searching a new frequency from that station's "AF" list. The preset number does not appear in the display if the" RDS" data for the station received is different from the originally memorized RDS station. When "AF" is searching for the next frequency, muting may be temporarily interrupted by another program. The tuner will only tune RDS stations when you use "AUTOMATIC TUNING" tuning or "AUTO SELECT" function with the AF function on. If the receiver cannot find a suitable alternative frequency or the radio signal is too weak for proper reception. "SEARCH" appears in the display , and the receiver searches for another frequency broadcasting the same , or related program. During "SEARCH", the sound of the radio will be muted somewhat longer than for AF search. Muting is released after "SEARCH", even if the radio could not find the same, or related program, and returns to the previous frequency. PI Search If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Search will automatically start. In the case of AF, which lets you set the tuner to re-tune frequencies automatically, REG (regional) lets you limit the list of alternative frequencies to stations broadcasting regional programs. Regional programming and regional networks are organized differently by each country (i. Press button [15] for 2 seconds or longer to select the function setting mode. When you recall preset stations with REG ON, the preset number will not appear in the display if the tuner receives a regional station different from the originally memorized one. When no PTY code is output from the station being received, "NONE" appears on the display. TA (Traffic Announcement standby) function lets you set the system to switch automatically to traffic announcements as they are broadcast when you are tuned to a TP or EON TP station, whether you are listening to the radio, CD or CD changer. EON TP stations are stations that carry information which cross references TP stations. The system switches back to the original source after traffic announcement reception. The tuner only stops at TP or EONTP stations when you use SEEK tuning with the TA function ON. The tuner only stores TP or EONTP stations when you use AUTO SELECT function with the TA function ON. [. . . ] When a CD is inserted in the disc slot, pressing button [9] will alternate between CD and CD changer. When two or more CD changers are connected, press button [9] to select a desired one. 5 seconds, fast forward/rewind will operate, and it will not be possible to perform a track number search. This is displayed to warn against possible damage when the inside of the CD player or CD changer overheats. [. . . ]