User manual PIONEER DEH-7350BT

[. . . ] To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. Also, damage to this unit, smoke, and overheating could result from contact with liquids. [. . . ] After selecting, perform the following procedures to set the initial setting. FM STEP (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. AM STEP (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). AUX (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. This setting allows you to switch your source to USB/iPod automatically. oN ­ When a USB storage device/iPod is connected , depending on the type of device , the source is automatically switched to USB/iPod when you turn on the engine. If you disconnect your USB storage device/iPod, this unit's source is turned off. SW CONTROL (rear output and subwoofer setting) The rear speaker leads output and RCA output can be used for full-range speaker or subwoofer connection. If you switch to REAR-SP :SW, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Even if you change this setting, there will be no output unless you turn the subwoofer output on (refer to SUBWOOFER1 (subwoofer on/off setting) on the previous page). If you change this setting, subwoofer output in the audio menu will return to the factory settings. BT CLEAR (resetting the Bluetooth wireless technology module) Bluetooth telephone data can be deleted. To protect personal information, we recommend deleting this data before transferring the unit to other persons. VER INFO (Bluetooth version display) You can display the system versions of this unit and of Bluetooth module. S/W UPDATE (updating the software) This function is used to update this unit with the latest software. Note AUX cannot be selected unless the auxiliary setting is turned on. Use speakers over 50 W (output value) and between 4 W to 8 W (impedance value). When installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car's body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction. [. . . ] 3) Depending on the generation or version of the iPod, some functions may not be available. Pioneer accepts no responsibility for data lost on the iPod, even if that data is lost while this unit is used. Playable files: up to 999 File system: ISO 9660 Level 1 and 2, Romeo, Joliet Multi-session playback: Compatible Packet write data transfer: Not compatible Regardless of the length of blank sections between the songs from the original recording, compressed audio discs play with a short pause between songs. The user cannot assign folder numbers and specify playback sequences with this unit. [. . . ]